What Did You Do With Your Rig Today?

[Robert OB 33/48]

Installed some LED Headlights.
It wasnt a standard job. There are no LED units for the Liberty, so I had to make some.

View attachment 85739 View attachment 85740 View attachment 85741 View attachment 85742

It doesnt look to shabby I guess.

 

[Gabriel Bozeman]

Installed some LED Headlights.
It wasnt a standard job. There are no LED units for the Liberty, so I had to make some.

View attachment 85739 View attachment 85740 View attachment 85741 View attachment 85742

It doesnt look to shabby I guess.

Very nice!

 

[KonzaLander]

I did what the rig knows best!
Typical sight for a Cruiser.
View attachment 85743

 

[FUNHOGN (aka Maurice)]

I now have my recovery gear box permanently mounted and easily accessible. Also, I finally upgraded my phone holder with a RAM mount on the A pillar.
View attachment 85744 View attachment 85745 View attachment 85746

 

[KonzaLander]

@FUNHOGN (aka Maurice) - What kind of saw is that sitting on top of your recovery gear? I've never seen one quite like that.

 

[FUNHOGN (aka Maurice)]

@FUNHOGN (aka Maurice) - What kind of saw is that sitting on top of your recovery gear? I've never seen one quite like that.

It's a Fiskars 18 inch - D-Handled Pruning Saw. $20 at Home Depot. Extremely sharp and the D-handle is (at least for me) is ergonomically perfect.
View attachment 85762

 

[Fozzy325]

I now have my recovery gear box permanently mounted and easily accessible. Also, I finally upgraded my phone holder with a RAM mount on the A pillar.
View attachment 85744 View attachment 85745 View attachment 85746

You did what I’m going to do with my recovery kit. Just waiting to get a cheap second hand double rifle case

 

[Fozzy325]

I call all of you LR3/4 drivers with lift rods that say you can change them on the fly liars..

Lol
Ok I fitted my rods in -26 today. Fronts were not to bad. But OMFG the rear. You have to lay down and get under the pre lifted vehicle.. frost nip to the fingers and a mudded suit.

These are not a 5 min pop on off prior to jumping on the trail.

Lol liars. Lol

Well it’s all good now but I hit the roof of my apartment so I need to be careful

 

[sakiwest]

New tires (Falkin Wildpeak) and my Recovery Tracks (knockoff eBay version) came in today. Perfect timing for the snowy weekend!

 

[Gabriel Bozeman]

New tires (Falkin Wildpeak) and my Recovery Tracks (knockoff eBay version) came in today. Perfect timing for the snowy weekend!

Very nice!

 

[FUNHOGN (aka Maurice)]

You did what I’m going to do with my recovery kit. Just waiting to get a cheap second hand double rifle case

Keep an eye on Sam's Club. I bought two of them new from Sam's Club for less than $70 each (seasonal closeout). Before mounting them to the truck, I sprayed the tops and sides with Plasti-Dip to protect them from UV degradation. If the plasti-Dip gets scratched off It's easy to re-apply.

 

[Chingon Granpa]

Finally got the rack in for my P38 Range Rover. It's beautiful. Voyager Off-Road has done an amazing job. I highly recommend them. Easy install too. This is step 1 in a 2 stage process. The second stage is installing a bench seat in the back for extra passengers. I had to get a rack (plus I wanted one) so I could put the spare up there to create more legs room for the back passengers. I'll post later about the seat when I get it installed.


Best Regards,
Gabriel BozemanView attachment 85624View attachment 85625View attachment 85626

Sweet, going to look into that rack.

 

[Fozzy325]

Keep an eye on Sam's Club. I bought two of them new from Sam's Club for less than $70 each (seasonal closeout). Before mounting them to the truck, I sprayed the tops and sides with Plasti-Dip to protect them from UV degradation. If the plasti-Dip gets scratched off It's easy to re-apply.

Shame we don’t have a sams club in canada

 

[PolarExpress]

I added the Teraflex Big Rotor Kit to Polar Express. Big difference in stopping power and pedal feel from stock. View attachment 85849

 

[A-Aron]

Got my new bumper finished enough to primer and attach for some weekend trails!...View attachment 85851

 

[Joey83]

Got my car back from the mechanic, washed and vacumed it.

Parts replaced:

4 new brakerotors
8 new brakepads
5.8L/1.4 US gallons of oil
1 new oilfilter
1 new waterpump and gasket
2 new belts

Price: $2481,07 all in for 11 hours of work.

Conclusion: I need to save up and find a 4wd with cheaper parts, Hyundai's are expensive!

 

[Rusty burbin]

Got my car back from the mechanic, washed and vacumed it.

Parts replaced:

4 new brakerotors
8 new brakepads
5.8L/1.4 US gallons of oil
1 new oilfilter
1 new waterpump and gasket
2 new belts

Price: $2481,07 all in for 11 hours of work.

Conclusion: I need to save up and find a 4wd with cheaper parts, Hyundai's are expensive!

I got a new ZZ4 350cid (5.7L) crate motor for less than half that price, granted it was an insanely lucky find... I'm just sayin.

 

[Fozzy325]

Got my car back from the mechanic, washed and vacumed it.

Parts replaced:

4 new brakerotors
8 new brakepads
5.8L/1.4 US gallons of oil
1 new oilfilter
1 new waterpump and gasket
2 new belts

Price: $2481,07 all in for 11 hours of work.

Conclusion: I need to save up and find a 4wd with cheaper parts, Hyundai's are expensive!

Labour was about 1k

 

[FUNHOGN (aka Maurice)]

Shame we don’t have a sams club in canada

Bummer!

 

[great08]

Got my car back from the mechanic, washed and vacumed it.

Parts replaced:

4 new brakerotors
8 new brakepads
5.8L/1.4 US gallons of oil
1 new oilfilter
1 new waterpump and gasket
2 new belts

Price: $2481,07 all in for 11 hours of work.

Conclusion: I need to save up and find a 4wd with cheaper parts, Hyundai's are expensive!

And... that is why I do the work myself.

Save money and I know it’s done right.

Those are expensive parts! You can usually buy OEM parts for 50% off at the auto parts store. Dealers/mechanics mark them up for even more profit.

That $1000 would have bought some nice tools and paid for themselves their first use.