Member II
Did some work on the camper preparing for next weekend and then my trip to Maine
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Member III
- 2,827
- First Name
- Joshua
- Last Name
- Downs
- Member #
-
20468
- Ham/GMRS Callsign
- KK6RBI / WQYH678
- Service Branch
- USMC 03-16, FIRE/EMS
Pulled the lunchbox locker out of the D35 (Previous owner installed) and installed a new set of open diff spider gears.
Garyindiane
Rank II
Enthusiast II
Camping at Hoosier National.
Member II
Got everything ready to head out to the expo then my yearly trek back to Maine
Last edited:
Traveler III
Thanks to @J_Walker1977 I got my rear seat delete built and installed!!
This was a project that hit multiple road blocks. Starting with just getting the seat out. My 18mm deep socket is buried in storage somewhere, so I used a box end to break them and a crescent to get them off, then realized I have to remove the 40% seat to get the 60% out. So finally, I borrowed a deep socket 18mm. It was at this point that I realized I left the 3 nuts I had already taken off on the tailgate the other day. So I called the stealership to see what the maximum I would have to pay to replace them would be. $12.50 per nut!!! Then I found a wrench-a-part about 5 miles from my house. It was a $2 entrance fee. I found the nuts in the 1st veh I looked in, and they cost me $0.25 each. Take that Bastrop Ford!!! So disaster averted I began planning the new insert. 3-4 versions later, I settled on something I was pretty happy with, and @J_Walker1977 offered me his shop to build it. A few minor hiccups and design alterations later, and I've got a solid new cabinet sitting where my 60% rear seat used to sit. It breaks down into a few parts with a total of 16 screws and 2 nuts.
The drawer was his handiwork because of a design oversight on my part. But I like it better this way.
This is stage 1. I'm going to live with it for a while and see what I like and don't like. Stage 2 will give it paint or stain, and a slide out for the fridge, as well as any other changes I realize I'm in need of.
As luck would have it, the solar panel fits on the passenger side like it was designed that way (it wasn't). So a bungee will get installed to hold it in place.
(Excuse the loose tools in the floorboard I hadn't gotten them all put away and was losing light for the pictures)
This was a project that hit multiple road blocks. Starting with just getting the seat out. My 18mm deep socket is buried in storage somewhere, so I used a box end to break them and a crescent to get them off, then realized I have to remove the 40% seat to get the 60% out. So finally, I borrowed a deep socket 18mm. It was at this point that I realized I left the 3 nuts I had already taken off on the tailgate the other day. So I called the stealership to see what the maximum I would have to pay to replace them would be. $12.50 per nut!!! Then I found a wrench-a-part about 5 miles from my house. It was a $2 entrance fee. I found the nuts in the 1st veh I looked in, and they cost me $0.25 each. Take that Bastrop Ford!!! So disaster averted I began planning the new insert. 3-4 versions later, I settled on something I was pretty happy with, and @J_Walker1977 offered me his shop to build it. A few minor hiccups and design alterations later, and I've got a solid new cabinet sitting where my 60% rear seat used to sit. It breaks down into a few parts with a total of 16 screws and 2 nuts.
The drawer was his handiwork because of a design oversight on my part. But I like it better this way.
This is stage 1. I'm going to live with it for a while and see what I like and don't like. Stage 2 will give it paint or stain, and a slide out for the fridge, as well as any other changes I realize I'm in need of.
As luck would have it, the solar panel fits on the passenger side like it was designed that way (it wasn't). So a bungee will get installed to hold it in place.
(Excuse the loose tools in the floorboard I hadn't gotten them all put away and was losing light for the pictures)
Attachments
Member II
Member III
While getting gas, a guy came up and asked about the cargo rack. We talked for a bit, I introduced him to OB and invited him to next week's monthly meet.
Enthusiast III
Finally got around to installing the molle panels nd shelf I bought for the 4Runner. Definitely helps with organizing....now I just need to clean and organize
Decided to go with a softer tire this year for winter so dismounted and mounted a few tires
Attachments
Influencer I
- 3,240
- First Name
- Dave
- Last Name
- Zimmer
- Member #
-
30139
- Service Branch
- USN (ret)
New light assembly's and LED's
I designed the Bumper and brush guard to fold forward for access. I did not make the brush guard.
I did build the bumper tho and it's all on piece.
Zim
I designed the Bumper and brush guard to fold forward for access. I did not make the brush guard.
I did build the bumper tho and it's all on piece.
Zim
Member III
Went to church still covered in mud from yesterday's trip to Hidden Falls. 
Member III
Some video of the Hidden Falls trip yesterday
Member III
- 2,827
- First Name
- Joshua
- Last Name
- Downs
- Member #
-
20468
- Ham/GMRS Callsign
- KK6RBI / WQYH678
- Service Branch
- USMC 03-16, FIRE/EMS
Not today but 2 days ago I replaced the worn out OEM seats in the YJ with Corbeau MOABs. I was hoping that they would work without fuss on the factory seat brackets. The passenger side works great but the driver's side while they bolt to the stock brackets/rails sits far too high in the thigh area so unless you are Olympic runner skinny it's a very tight squeeze between the wheel and the seat unless you have a tilt wheel but even then you sit quite a bit higher than the stock seats. I went ahead and bit the bullet and ordered the Corbeau bracket, which supposedly fixes this issue. Considering they claim these are purpose made for the likes of the CJ5/6/7/8 and YJ I feel they make them this way, so you have to buy their brackets. But that may be the tin foil talking. New bracket comes in today, but I'm at work so won't get to mess with it until tomorrow.
Traveler III
- 1,043
- First Name
- Brian
- Last Name
- Cottom
- Member #
-
31011
- Service Branch
- Army
Installed my Explore Tennessee plate
Attachments
Finally got around to chasing down the squeak. Replaced the double cardan.
Attachments
Member III
Some friends and us drove to Kerrville on Friday afternoon so we could watch the eclipse Saturday. Then we took them on their first trip through the real Hill Country down to Medina.
Explorer I
- 3,680
- First Name
- Brian
- Last Name
- McGahuey
- Member #
-
23711
- Ham/GMRS Callsign
- GMRS WRMV941
We did the same. Drove down to the Oregon/Nevada border Friday night, and we're lucky enough to have the clouds clear enough to see it on Saturday. My 7yo daughter loved it!
Advocate I
My roof rack didn't come with a decal from the manufacturer so I added a good one.
Attachments
Not today, but Sunday I fired the Jeep (TJ) up for the first time in nearly a year, washed it up, knocked the cob webs down inside and drove it around town. Heading to get the emissions checked on it this afternoon before any new CIL's come on. Goal is to NOT let it sit that long again on new tags.
Inventor I
- 13,232
- First Name
- Bjoern
- Last Name
- Eldracher
- Member #
-
20111
- Ham/GMRS Callsign
- DO3BE
Replaced the front windscreen washer nozzle today. One photo says it all:
