What Did You Do With Your Rig Today?

  • HTML tutorial
Truckerbizz

Truckerbizz

Rank VI
Launch Member

Influencer II

3,065
Reno NV
Member #

0982

roamingtimber said:
I spent at least 10 hours cleaning up my bumper, all with an angle grinder. My hands are still numb. But I got it primed and painted. I just need to drill some holes for the license plate, aux lighting and wheel well liners, the wire up the new fog light harnesses and I can install this beast. I've been working on it for 4 months. It's not perfect, but it would take me another 4 months to make it perfect. At some point you have to call it good enough.

Click to expand...
One saying I really like is, "don't let perfection get in the way of good" that being said, your bumper looks awesome! Definitely will look great on your jeep.
 
John Galt

John Galt

Rank III

Advocate II

626
Bend, OR
Bought an RTT. Went with a CVT Rainier model. CVT is local to where I live and seem to have nice products. My buddy grabbed it for me and took some pics of it on his Taco. He didn't want to take it off and give it to me :) can't wait to get out and start using it. Also bought a little buddy tent heater with the 10' adapter hose to hook it to a 20lb propane bottle.
 
  • Like
Reactions: r_vdb and NorthStar96
Steve

Steve

lost again...
Founder 500
Launch Member

Traveler III

4,312
Lorain County, OH, USA
First Name
Steve
Last Name
None
Member #

202

Yesterday and today, I took all the stuff out of and of of my Outback that isn't going to be sold with it. Took about three hours and had half the dash apart just remove the hardwired GPS and Sirius radio, as well as the Garmin backup camera. Took off the kayak straps mounted under the hood, the racks, inverter, USB extension, all the tools and spares, etc. Damn, there was a lot of stuff in there? Probably gets 4 MPG better now...

Then I:

 
  • Like
Reactions: Luis Merlo, NorthStar96, ShawnR and 1 other person
utspoolup

utspoolup

Rank V
Founder 500
Launch Member

Member III

2,741
Murray Utah
Member #

0457

Finally a day off, AND I have my X back! 14 days... I felt like a target driving a Juke, I had a dozen cars pull out right in front of me, that never happens in the X. Guess size does matter on some things.

Anyways, did a few odds and ends to the truck. Did a trail mount for the propane tank and bracket. SOLID, functional, and convent. I'm digging it. Of course, it will only be up there when outdoors. Went for a little ride to check it out, looks like it will do fine, I do need to place some weather stripping or maybe a few wraps of silicon self fusing tape around the base to prevent an occasional ringing from the Gobi floor and mount floor tapping. But I think it came out great. Used a Manchester 5lb propane tank, powertank 5lb mount, and a pair of fourtrek perpendicular mount. I did need to cut off on of the screw holes on the end of each bar to fit in this application. Nothing a cutoff wheel and a burr grinder to clean it up didn't solve.





 
  • Like
Reactions: Sonarman, Luis Merlo, r_vdb and 2 others
ShawnR

ShawnR

Rank VI
Launch Member

Influencer II

3,316
Bettendorf, Iowa, USA
First Name
Shawn
Last Name
Reimers
Member #

0782

Service Branch
Army
Finally enjoyed the day topless for the first time this year! Fortunately I was able to get the soft top off without having to unhinge the roof rack.
IMG_1604.JPG
 
John Galt

John Galt

Rank III

Advocate II

626
Bend, OR
utspoolup said:
Finally a day off, AND I have my X back! 14 days... I felt like a target driving a Juke, I had a dozen cars pull out right in front of me, that never happens in the X. Guess size does matter on some things.

Anyways, did a few odds and ends to the truck. Did a trail mount for the propane tank and bracket. SOLID, functional, and convent. I'm digging it. Of course, it will only be up there when outdoors. Went for a little ride to check it out, looks like it will do fine, I do need to place some weather stripping or maybe a few wraps of silicon self fusing tape around the base to prevent an occasional ringing from the Gobi floor and mount floor tapping. But I think it came out great. Used a Manchester 5lb propane tank, powertank 5lb mount, and a pair of fourtrek perpendicular mount. I did need to cut off on of the screw holes on the end of each bar to fit in this application. Nothing a cutoff wheel and a burr grinder to clean it up didn't solve.





Click to expand...
I really need to mount my propane outside the vehicle. Thinking of integrating it into the Jerry can mount on my second swing out. I just put it inside the back of the cruiser right now. My the safest or best though. Your looks really nice btw! I only have Yakima load bars though so that wouldn't work for me.
 
  • Like
Reactions: NorthStar96
Lars

Lars

Rank V
Launch Member

Advocate II

2,093
Wyldwood, TX
Member #

0654

I replaced my Mobile HF rig (Kenwood TS-480Sat) with another Mobile HF Rig, that adds the 2M, and 70Cm bands (Icom IC-706 Mk.II G) Which included installing an LDG Z100 auto tuner under the seat, driven by the radio, and adding another dual band antenna (Yet to be done) to the back of the truck.

Here's the new control head mounted roughly where the Kenwood control head was.
 
  • Like
Reactions: NorthStar96, benmmc, VCeXpedition and 2 others
utspoolup

utspoolup

Rank V
Founder 500
Launch Member

Member III

2,741
Murray Utah
Member #

0457

New rear bumper. From Shrock to Maxterra. The Jerry can addition is nice and the main reason for wanting to replace the Shrock, the lights are nice, the welds are nice. The entire thing, beyond what I wanted. Was over at his place today around lunch, took off the Shrock, mounted his bumper, pizza came, ate, and he wired the lights (license plate light, backup lights, and marker lights). Super smooth, awesome product, and great customer service. Just finished installing the trailer plug and wiring.

Thanks again to Dave and Rob for everything.



 
  • Like
Reactions: Sonarman, Luc, Luis Merlo and 4 others
Trixter404

Trixter404

Rank IV
Launch Member

Advocate II

1,337
Olympia, WA, USA
First Name
Steve
Last Name
Hannum
Member #

0658

utspoolup said:
New rear bumper. From Shrock to Maxterra. The Jerry can addition is nice and the main reason for wanting to replace the Shrock, the lights are nice, the welds are nice. The entire thing, beyond what I wanted. Was over at his place today around lunch, took off the Shrock, mounted his bumper, pizza came, ate, and he wired the lights (license plate light, backup lights, and marker lights). Super smooth, awesome product, and great customer service. Just finished installing the trailer plug and wiring.

Thanks again to Dave and Rob for everything.



Click to expand...
Looks great! I need to get mine ordered.
 
MA_Trooper

MA_Trooper

Rank VI
Launch Member

Influencer II

3,969
Methuen, MA
First Name
Chris
Last Name
BRV
Member #

0520

Bad storms here in Texas lately. Had a downed tree across the road. The rig played "good Samaritan" and removed the tree. Got to use a tow strap and 4lo. Was a little fun. Now I'm soaked though, and there is an AC vent above my desk.
 
  • Like
Reactions: NorthStar96 and RiverCityDave
RiverCityDave

RiverCityDave

Rank V
Founder 500
Launch Member

Advocate II

1,788
Austin, Texas
First Name
Dave
Last Name
Hunter
Member #

267

Service Branch
Army
I fixed my windshield Washers. The booster that feeds the rear washer nozzle is either clogged or broken, so the fluid was just spraying out under the hood. I cut the end off the hose, bypassed the rear, and connected the hose directly to the hood connections. They now work better than they ever have, however Im battling my OCD by not having that rear nozzle working, even though I never ever use it. We'll see if practicality or Obsessive Compulsive Disorder wins in the end....
 
RiverCityDave

RiverCityDave

Rank V
Founder 500
Launch Member

Advocate II

1,788
Austin, Texas
First Name
Dave
Last Name
Hunter
Member #

267

Service Branch
Army
McDowra said:
Hooking up usb port, volt meter and cigarette lighter on rear platform.
Click to expand...

This is great, after I fix this annoying whine in the back end of my rig, my next big project is some power distro all throughout. How did you run the juice back?
 
  • Like
Reactions: BEAR
You must log in or register to reply here.
Top Bottom