What Did You Do With Your Rig Today?

[cug]

Cleaned it:







And letting it try:



After I was able to smile again:

 

[peeeeetey]

I replaced it! 2019 TRD PRO Tundra to replace 2005 Suburban. Car under the cover is a slightly destroyed 2005 Tahoe which the Burb replaced it. Now a question..Has anybody installed a front camera on one of these Tundras? I found a gizmo on Ebay that looked like it might work. It can use the original rear camera in addition to a front to be added without cutting wires.

 

[grubworm]

I found a gizmo on Ebay that looked like it might work. It can use the original rear camera in addition to a front to be added without cutting wires.

got a link? i have an '18 tundra and i wanted a front camera and the only thing i knew to do was get the one that clips on the rear view mirror and plugs into the cigarette lighter. would love one that is mounted/wired better than that. does the camera record? im guessing its a dashcam to record whats going on as youre driving...thats what i am wanting

nice rig! youre going to love the tundra!

 

[peeeeetey]

Toyota Tundra Front Backup Camera Connect Kit 2014 2015 2016 2017 2018 2019 2020 | eBay

This kit is intended for the owners ofToyota Tundra cars produced between 2014-2020 years. 2014 Toyota Tundra. 2015 Toyota Tundra. 2016 Toyota Tundra. 2017 Toyota Tundra. 2018 Toyota Tundra. 2019 Toyota Tundra.

www.ebay.com

Here it is.

 

[JCross]

Prepared the roof for the Prinsu roof rack.

 

[JCross]

Getting ready to finish the rear suspension.

 

[Gorunhannah]

We gotta a lot of work.

 

[Flatlander101]

Ok. Is time to post ...What did you do with your Rig Today? ( Credit of this thread goes to Mud forum...you know where ) It could be... washed it, went wheeling, maintenance, fix, add accessories, Mods, etc.
Just post it here. you can post as many times as you want. I know title says today, post it even if it was last week, last month, last year... just do it!

Today...80 selfie :-0

Not today...breakfast ...Fishing trip/camping. love cooking on the outdoors.

Frisly

What did I do?
Framed out the roof of my wedge camper

 

[Outdoordog]

Installed the Teraflex hinged tire carrier. Very well made, very adjustable, but on the pricy side.

 

[Sparksalot]

Swapped out the Element fire extinguisher for a 4# BC unit with a quick release bracket. The Bracketeer mount still works fine. The Element is now in a door pocket.

 

[Downs]

Took it out for a 60 mile drive today to shake out more bugs and check out some rental properties. Ran great, never got even a little warm. Cruises great at 45. Floorboards get a little warm. The transmission breather is apparently missing the cap so it blew enough oil out to seep out from under the transmission inspection plate, routed a vinyl tubing line from there up into the engine bay and will be routing the other breathers there before I go to Arkansas later this month.

Last few sessions of working on have seen these items done.
REPLACED ACCELERATOR PUMP ON SOLEX CARB

1. BACK FLUSHED RADIATOR
2. INSTALLED USMC "RAMS HORN" TOW HOOKS
3. INSTALLED TOW BALL PLATE SO I CAN TOW THE M416, NOT FOR RMR BUT JUST AROUND HERE
4. INSTALLED 6 PORT AUX FUSE BLOCK FOR EXTRA ACCESSORIES
5. INSTALLED GMRS RADIO AND ANTENNA
6. INSTALLED 700 WATT INVERTER
7. INSTALLED 12V OUTLET
8. INSTALLED 3 PORT USB (USB-A x2 USB-C x1) OUTLET
9. CLEANED UP AND PAINTED SPARE WHEEL
10. MOUNTED SPARE TIRE ON WHEEL
11. INSTALLED SPARE TIRE MOUNT ON TUB
12. INSTALLED WINDSHIELD
13. INSTALLED TOP BOWS
14. INSTALLED "SUMMER" TOP
15. FOUND A DEAD ALTERNATOR INSTALLED A NEW ONE.

 

[JCross]

Took it out for a 60 mile drive today to shake out more bugs and check out some rental properties. Ran great, never got even a little warm. Cruises great at 45. Floorboards get a little warm. The transmission breather is apparently missing the cap so it blew enough oil out to seep out from under the transmission inspection plate, routed a vinyl tubing line from there up into the engine bay and will be routing the other breathers there before I go to Arkansas later this month.

Last few sessions of working on have seen these items done.
REPLACED ACCELERATOR PUMP ON SOLEX CARB

1. BACK FLUSHED RADIATOR
2. INSTALLED USMC "RAMS HORN" TOW HOOKS
3. INSTALLED TOW BALL PLATE SO I CAN TOW THE M416, NOT FOR RMR BUT JUST AROUND HERE
4. INSTALLED 6 PORT AUX FUSE BLOCK FOR EXTRA ACCESSORIES
5. INSTALLED GMRS RADIO AND ANTENNA
6. INSTALLED 700 WATT INVERTER
7. INSTALLED 12V OUTLET
8. INSTALLED 3 PORT USB (USB-A x2 USB-C x1) OUTLET
9. CLEANED UP AND PAINTED SPARE WHEEL
10. MOUNTED SPARE TIRE ON WHEEL
11. INSTALLED SPARE TIRE MOUNT ON TUB
12. INSTALLED WINDSHIELD
13. INSTALLED TOP BOWS
14. INSTALLED "SUMMER" TOP
15. FOUND A DEAD ALTERNATOR INSTALLED A NEW ONE.

View attachment 283826

That is awesome, would love to have one.

 

[Downs]

That is awesome, would love to have one.

They aren't getting any cheaper. I got this one in running condition but with a blown head gasket for 2000. Here's what it looked like when I towed it home.

 

[TexasLandman]

That is awesome, would love to have one.

They aren't getting any cheaper. I got this one running for 2000. Here's what it looked like when I towed it home.

View attachment 283829View attachment 283830

That’s awesome! I lucked out 4 years ago and picked up a VEC 1946 cj2a for a trade on a junker AR and a Glock. The only caveat was that it was minus an engine and completely disassembled. It’s all there and I have since sourced a flathead L134. Me and my 9 year old will have at it soon.

 

[Downs]

They're a joy to work on for sure. Nice and easy. My suggestion to make life easier and cut back on gremlins. Invest in a new wiring harness. Don't spend money on REpro gauges except maybe a speedo, the other gauges will still look nice if you go with the basic low cost bosch gauges and will actually work longer than a month lol.

 

[Jason Shelby]

Installled the remote air chucks for the ARB Air compressor, and mounted the Hi-Lift Jack to the inside in the bed.

Waiting on the UPS guy to finish installing an Anderson plug for the trailer.

Then Saturday hoping finish installing the ARB compressor.

 

[North American Sojourner]

Getting ready for the drawer system. Cleaned out the double beds (wood) jacked up the topper and put in the gasket and put the headache rack back on. Long day or two.
Zim

 

[roots66]

Helped my son move into his new apartment.

 

[Jason Shelby]

Got the Anderson Plug for the trailer, and occasionally jumper cables, installed after work.

 

[JimBill]

Pacific Northwest Road trip, HWY 20 Oak Harbor WA to 101 down the coast to central CA.