What is the last thing you bought and plan to buy?

[Coreymol]

I mean..... im no stranger to it...... that photo was taken about 45 minutes after into my first real drive with her. @roots @SJ.Overland

At the end of this trip in the photos mine was covered in mud you could not see the green

 

[MSD]

Hasn’t happened yet but it’s paid for new trans & torque converter & transfer case for Vinnie. Plus lights for the rack. Ouch that was a quick $6k out the door.

 

[roots66]

Already had the lights, so decided to get the hitch mount so I can actually see behind me when backing up. And since I was at it, got some new soldering bits too.

 

[JDGreens]

I just purchased a used roof top carrier. Bought it pretty cheap so I thought I'd experiment a little with it. I figure on storing all my light gear in it. Like clothes sleeping bag ect. All that bulky stuff that takes up way to much space.

 

[NotGumby]

NashFabCo rear door ladder for the Lexus GX460/LC Prado 150

 

[Shahn]

Spotted & picked up these at the hardware store today, they will be perfect to hang my string lights on the RTT or the awning and all kinds of other things. They slide nicely into the channel on both.

 

[Bama_Kiwi]

Just bought one of these:

Rear Door Table - Mitsubishi Pajero NX

Rear Door Table - Mitsubishi Pajero NX

www.kaon.com.au

 

[K-G]

Last purchase: new KO2 tires.

Next purchase, new tie rods, pitman, and idler arm.

 

[OcoeeG]

Bought some LEDs to illuminate the trailer and a 10 inch fan for the RTT on the trailer. Progress!

 

[05EXCURSION]

I just picked up an M105A2 military trailer that I plan on turning into my base camp. Will be moving the roof top tent from the excursion or to the trailer. Will be installing a diesel heater, water tank, water pump for the shower and sink. So many things to buy now that I have a large platform to built off of. Will kept you posted

 

[MrChris]

Spent too much time on some washboard roads, shaking off my engine skid plate...thus, the new RCI skid plate! About 20lbs heavier, but not thin steel, thick steel! : D

 

[roots66]

Apparently, this is my allowed limit

 

[BCMoto]

Upgraded the OEM fog lights to this kit from Baja Deseigns

 

[Autism Family Travels]

Are you people having issues with getting parts quickly? I have had a bunch of stuff ordered for weeks and still not here. Rough country full lift kit, new tires and other suspension bits. NONE here. anyone else having this issue?

 

[BCMoto]

If it makes you feel better my friend ordered 2 different lift kits for GX and 8 months later he received 1 of the 2 kits.

 

[SJ.Overland]

I ordered new wheels 3 weeks ago and they said don’t expect them until mid July

 

[Autism Family Travels]

OK, I hope my parts are not that long considering I need them to get the patriot road safe now.

 

[K-G]

Had just returned from a road trip across three states to see family when my radiator barfed all over my drive way. Soooooo….

Installed a new radiator, hoses, and water pump for good measure (180k on the ‘05).

Also replaced the idler arm and bracket, inner and outer tie rods, sway bar links and bracket bushings. I was gonna do the upper and lower control arms as well, but the radiator failure preempted that.

One note, I used the MOOG Problem Solver series. They appeared to be stronger than OEM. I ordered the Rough Country end link sleeves to add more rigidity, and found they do not fit the MOOG PS parts. This seems to confirm the OEM++ build of the parts.

I know RC says the sleeves only fit OEM links, but I assumed they were talking of the massive “Kryptonite” links. So if you are a Silverado owner looking to the RC link sleeves, don’t use the MOOG PS parts. I’m more than happy with the approach I took though.

Next parts to buy, upper and lower control arms of course!

 

[Autism Family Travels]

I hope the sleeves are easier to get than my lift kit. ordered april 13, from my local dealer. They checked and it was showing in stock, it's still not in!

 

[Kozysnack]

Maxi Trac Vehicle Awning 8 Ft
Napa Auto parts