Hope everyone is having a good Thanksgiving weekend! and hopefully some have had a chance to get outside and explore. We finally got the chance to get our ARB awning mounted on the WJ, and recently re-routed the front brake line so it does not get severed again. Iron Rock Off Road critical path long arm kit has a wye shaped lower control arm on the drivers side, the upper leg of the Wye during a very hard full compression bump can pinch the brake line between the frame and control arm. This causes a rupture of the line and loss of brakes when you typically need them the most. First time it happened I passed it off as a random failure of an old brake line, but when it happened again further investigation located the cause of the pinching problem. Ended up adding an additional section of hard line and relocated the brake hose mounting bracket forward about half a foot. (I have also noticed IRO has replaced their 3 link kit with a 4 link one eliminating the wye)