Tornado Driving - What to do

[Michael]

Michael submitted an Article on the main site!

Tornado Driving - What to do

We found ourselves driving through a tornado - here is what we learned.







7 Tornado Safety...

Continue reading the Original Blog Post.

 

[Tony Patrignani]

I bought the same tool roll, actually Micheal bought it because I bought it! I haven't loaded it yet because I wasn't 100% sure what I needed. Thank you for creating this list and for the video! This has inspired mt to FINALLY organize my rig's tools. **This thing is super heavy duty, love the quality!**

OH, I'm just kidding I copied Michael and Corrie.........OB#11480

 

[SubeeBen]

Michael submitted an Article on the main site!

Don't Leave Home Without This - Tool Roll Essentials

What's in your kit?! Every off-grid capable rig needs to have a tool kit capable of handling most repair needs on the trail. The kit is going to be vehicle dependent, so you need to do a bit of...

Continue reading the Original Blog Post.

Sweet looking tool roll, who is it made by ?

 

[MOAK]

Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.

 

[MOAK]

Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.

I do carry a bit more of SAE sockets and wrenches because my trailer uses SAE fasteners. I also carry 1/2" drive tools for the bigger stuff.

 

[Anak]

Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.

That only works so long as there is nobody else in the group.

I have seen a whole lot of scrambling and searching through everybody's rig in an effort to find the tools/pieces to put another rig back into operable order.

I carry my stuff with the expectation that I will likely end up using it on someone else's rig. And I don't know which size tools their rig will need.

 

[Jkurubi12]

I've had to work more on other peoples rigs than my own (thankfully). Even though it is a bit more weight and room taken up, I prefer having a full compliment of tools, especially if we are going somewhere off the beaten path.

 

[MOAK]

That only works so long as there is nobody else in the group.

I have seen a whole lot of scrambling and searching through everybody's rig in an effort to find the tools/pieces to put another rig back into operable order.

I carry my stuff with the expectation that I will likely end up using it on someone else's rig. And I don't know which size tools their rig will need.

Certainly, I've used my tools on multiple occasions either by loaning them to someone or wrenching it myself. My 1/2 breaker bar, and sockets have come in handy for that sort of thing more than once. Bringing an entire tool kit, or even half of the tools I have on hand, would simply weigh too much and take up valuable space. It is only my opinion though and it works very well for us. Perhaps it depends on distances traveled. If I were going on a somewhat local run with a group, then sure, I'd pack in an extra this or that, including tools like chainsaws.

 

[trovilcl]

As someone who has a full size rig, I go a little overboard with my recovery/repair gear. I have a full compliment of tools to almost take my truck completely apart. Not a fan of having to rely on people, especially when they aren't there. I think though, it would be advised just as much to carry commonly broken spare parts as well. Another thing I think I will be throwing in my tool kit would be a 0-150 Ftlb torque wrench with ratcheting head in 1/2" drive. Having a truck that has a GVWR of 3000lbs is nice sometimes.

 

[slomatt]

Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.

Carrying a larger selection of sockets and wrenches can be useful if you have to work on other people's rigs. There is a lot of "close enough" overlap between metric and SAE (ex. 13mm = 1/2", 19mm = 3/4", etc) so I just carry a set of metric sockets and wrenches. I also carry a set of torx bits because a friend has a Jeep. One thing I haven't seen in some tool kits is a spark plug socket, which can be useful if you need to tighten/check/clean the plugs or blow oil out of the cylinders after a roll over.

https://www.overlandbound.com/forums/threads/vehicle-inventory.10765/

 

[MtnManAlex]

As someone who has a full size rig, I go a little overboard with my recovery/repair gear. I have a full compliment of tools to almost take my truck completely apart. Not a fan of having to rely on people, especially when they aren't there. I think though, it would be advised just as much to carry commonly broken spare parts as well. Another thing I think I will be throwing in my tool kit would be a 0-150 Ftlb torque wrench with ratcheting head in 1/2" drive. Having a truck that has a GVWR of 3000lbs is nice sometimes.

I carry the torque wrench in my kit too. It is necessary for most steering and suspension repairs (which I seem to have a lot of lately).

 

[Fordcappy]

I just joined the group, my first post, I received a tarp from adventure tool company, great experience, fast shipping and a fantastic high quality product. Can't say enough about them, I look forward to fitting my 4runner with their gear.

 

[OutOfStep]

Atlas 46 and blue ridge overland got some nice tool tool up bags

 

[AshtoninAZ]

I have learned through tough experiences that you cannot have enough sockets and wrenches. The key is organizing and storing them in the perfect spot

 

[Scout]

I have a 2016 Tundra that is my overland rig and DD.. I also have a '90 Jeep Wrangler that will be eased into this exciting new past time/ way of life and then there is the '66 IH Scout that will be more purpose built as a full time rig..To create a tool set for each rig will be VERY costly. I used to be a Linc/Merc tech and have many types,sets,combinations of tools to be able to have 1 tool set for all 3 rigs and possibly a secondary set of off the wall spares for other people I may be out on the trails with.. The only tool that is needed the most is the one you don't have with you..One of the things I learned when I 1st started at that dealership was if I used someone else's tool that I didn't have more than 3 times, by my own because they won't lend it out anymore.. So when you're out on the trail and ,God forbid, something happens, be sure you pay attention to what it is everybody is needing so you have it next time..

 

[Anak]

I have a 2016 Tundra that is my overland rig and DD.. I also have a '90 Jeep Wrangler that will be eased into this exciting new past time/ way of life and then there is the '66 IH Scout that will be more purpose built as a full time rig..To create a tool set for each rig will be VERY costly. I used to be a Linc/Merc tech and have many types,sets,combinations of tools to be able to have 1 tool set for all 3 rigs and possibly a secondary set of off the wall spares for other people I may be out on the trails with.. The only tool that is needed the most is the one you don't have with you..One of the things I learned when I 1st started at that dealership was if I used someone else's tool that I didn't have more than 3 times, by my own because they won't lend it out anymore.. So when you're out on the trail and ,God forbid, something happens, be sure you pay attention to what it is everybody is needing so you have it next time..

I live this world. All the way down to "if I needed to borrow it three times then I simply need to buy one", and it isn't that folks won't lend it to me again. It simply shows that I need to own that tool.

I have my tool kit broken into sub-kits. There is a kit in each vehicle that is dedicated to that vehicle. That kit involves a somewhat universal socket set/wrench set/hand tools plus the oddball large sockets need for that particular vehicle's transfer case fill plug or axle nut. But then I also have the traveling kit which I move from vehicle to vehicle as trips dictate. That is the kit that contains a scanner, fuel pressure gauge, multimeter, sets of gearwrenches and other things that are a bit too costly to own in multiples. Or at least own in multiples that correspond to my multiple vehicles.

 

[grubworm]

As someone who has a full size rig, I go a little overboard with my recovery/repair gear. I have a full compliment of tools to almost take my truck completely apart. Not a fan of having to rely on people, especially when they aren't there. I think though, it would be advised just as much to carry commonly broken spare parts as well. Another thing I think I will be throwing in my tool kit would be a 0-150 Ftlb torque wrench with ratcheting head in 1/2" drive. Having a truck that has a GVWR of 3000lbs is nice sometimes.

Ha...I'm with ya on going overboard! Boondocking like my wife and I do, we have to be self-reliant. I always keep my 18v Milwaukee cordless tools with me in the truck and at the least, I highly recommend a cordless drill with various bits and fasteners. I always have some Tek5 self tapping metal screws with me and with a scrap piece of flat bar, I can band-aid any broken weld on the trailer. For about $20 you can buy a nice set of nearly every bit...phillips, star, hex, torx, etc. Pretty handy to have...especially with the low quality of RVs now days, I'm always having to tighten something or add a screw. And of course, duct tape and a small roll of bailing wire. I was on nuke subs in the Navy and you'd be surprised at how much of a sub was repaired with duct tape.

 

[Keith Bieschke]

Michael,

Where did you get the cable ties with wire in them? I google it and haven't found anything yet.

Thanks in advance,

Keith

 

[tundra21]

You might try this company

Velcro® Brand Hook & Loop Cable Ties | Cable Ties Plus

The Velcro®Brand Cable Ties from Cable Ties Plus make bundling and securing wire and cable of virtually any size fast and easy! The hook and loop ties available on this page come in an extensive variety of convenient sizes and widths from 5" to 12" in length and 3/4" to 1" in width. These Hook...

www.cabletiesplus.com

I use their standard cable tie and now have a lot of specialized products.
Good Luck

 

[Connor_Dobbins]

I bought the same tool roll, actually Micheal bought it because I bought it! I haven\'t loaded it yet because I wasn\'t 100% sure what I needed. Thank you for creating this list and for the video! This has inspired mt to FINALLY organize my rig\'s tools. **This thing is super heavy duty, love the quality!**

OH, I\'m just kidding I copied Michael and Corrie.........OB#11480

What is the name/brand of the tool it looks really nice!