Tornado Driving - What to do

  • HTML tutorial

Tony Patrignani

Rank II
Launch Member

Traveler I

446
Athens, GA
Member #

11480

I bought the same tool roll, actually Micheal bought it because I bought it! I haven't loaded it yet because I wasn't 100% sure what I needed. Thank you for creating this list and for the video! This has inspired mt to FINALLY organize my rig's tools. **This thing is super heavy duty, love the quality!**

OH, I'm just kidding I copied Michael and Corrie.........OB#11480
 
Last edited:

MOAK

Rank V
Launch Member

Off-Road Ranger I

2,865
Wherever we park it will be home !!
First Name
Donald
Last Name
Diehl
Member #

0745

Ham/GMRS Callsign
WRPN 506
Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.
 
  • Like
Reactions: Scout

MOAK

Rank V
Launch Member

Off-Road Ranger I

2,865
Wherever we park it will be home !!
First Name
Donald
Last Name
Diehl
Member #

0745

Ham/GMRS Callsign
WRPN 506
Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.
I do carry a bit more of SAE sockets and wrenches because my trailer uses SAE fasteners. I also carry 1/2" drive tools for the bigger stuff.
 

Anak

Rank V
Launch Member

Member III

2,741
Sandy Eggo
Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.
That only works so long as there is nobody else in the group.

I have seen a whole lot of scrambling and searching through everybody's rig in an effort to find the tools/pieces to put another rig back into operable order.

I carry my stuff with the expectation that I will likely end up using it on someone else's rig. And I don't know which size tools their rig will need.
 
  • Like
Reactions: Boort

Jkurubi12

Rank II

Enthusiast I

434
Miami, Fl
First Name
Luis
Last Name
Beato
Member #

15525

Ham/GMRS Callsign
KN4VWL
I've had to work more on other peoples rigs than my own (thankfully). Even though it is a bit more weight and room taken up, I prefer having a full compliment of tools, especially if we are going somewhere off the beaten path.
 

MOAK

Rank V
Launch Member

Off-Road Ranger I

2,865
Wherever we park it will be home !!
First Name
Donald
Last Name
Diehl
Member #

0745

Ham/GMRS Callsign
WRPN 506
That only works so long as there is nobody else in the group.

I have seen a whole lot of scrambling and searching through everybody's rig in an effort to find the tools/pieces to put another rig back into operable order.

I carry my stuff with the expectation that I will likely end up using it on someone else's rig. And I don't know which size tools their rig will need.
Certainly, I've used my tools on multiple occasions either by loaning them to someone or wrenching it myself. My 1/2 breaker bar, and sockets have come in handy for that sort of thing more than once. Bringing an entire tool kit, or even half of the tools I have on hand, would simply weigh too much and take up valuable space. It is only my opinion though and it works very well for us. Perhaps it depends on distances traveled. If I were going on a somewhat local run with a group, then sure, I'd pack in an extra this or that, including tools like chainsaws.
 

trovilcl

Rank II

Enthusiast II

As someone who has a full size rig, I go a little overboard with my recovery/repair gear. I have a full compliment of tools to almost take my truck completely apart. Not a fan of having to rely on people, especially when they aren't there. I think though, it would be advised just as much to carry commonly broken spare parts as well. Another thing I think I will be throwing in my tool kit would be a 0-150 Ftlb torque wrench with ratcheting head in 1/2" drive. Having a truck that has a GVWR of 3000lbs is nice sometimes.
 

slomatt

Rank V

Influencer I

1,723
Bay Area, CA
Nice. I've been out on occasion with folks that bring entire wrench and socket kits. Anything more than the six or seven wrench or socket sizes you need is a waste of space and weight.
Carrying a larger selection of sockets and wrenches can be useful if you have to work on other people's rigs. There is a lot of "close enough" overlap between metric and SAE (ex. 13mm = 1/2", 19mm = 3/4", etc) so I just carry a set of metric sockets and wrenches. I also carry a set of torx bits because a friend has a Jeep. One thing I haven't seen in some tool kits is a spark plug socket, which can be useful if you need to tighten/check/clean the plugs or blow oil out of the cylinders after a roll over.

https://www.overlandbound.com/forums/threads/vehicle-inventory.10765/
 
  • Like
Reactions: MOAK

MtnManAlex

Rank IV

Pathfinder I

As someone who has a full size rig, I go a little overboard with my recovery/repair gear. I have a full compliment of tools to almost take my truck completely apart. Not a fan of having to rely on people, especially when they aren't there. I think though, it would be advised just as much to carry commonly broken spare parts as well. Another thing I think I will be throwing in my tool kit would be a 0-150 Ftlb torque wrench with ratcheting head in 1/2" drive. Having a truck that has a GVWR of 3000lbs is nice sometimes.
I carry the torque wrench in my kit too. It is necessary for most steering and suspension repairs (which I seem to have a lot of lately).
 

Fordcappy

Rank 0
Launch Member

Traveler I

60
Worcester, MA, USA
Member #

16748

I just joined the group, my first post, I received a tarp from adventure tool company, great experience, fast shipping and a fantastic high quality product. Can't say enough about them, I look forward to fitting my 4runner with their gear.
 
  • Like
Reactions: MOAK

AshtoninAZ

Rank III
Launch Member

Influencer II

770
Phoenix, AZ, USA
Member #

16837

I have learned through tough experiences that you cannot have enough sockets and wrenches. The key is organizing and storing them in the perfect spot
 
  • Like
Reactions: Scout

Scout

Rank V
Launch Member

Pathfinder I

1,798
Jamestown,NY
Member #

3609

I have a 2016 Tundra that is my overland rig and DD.. I also have a '90 Jeep Wrangler that will be eased into this exciting new past time/ way of life and then there is the '66 IH Scout that will be more purpose built as a full time rig..To create a tool set for each rig will be VERY costly. I used to be a Linc/Merc tech and have many types,sets,combinations of tools to be able to have 1 tool set for all 3 rigs and possibly a secondary set of off the wall spares for other people I may be out on the trails with.. The only tool that is needed the most is the one you don't have with you..One of the things I learned when I 1st started at that dealership was if I used someone else's tool that I didn't have more than 3 times, by my own because they won't lend it out anymore.. So when you're out on the trail and ,God forbid, something happens, be sure you pay attention to what it is everybody is needing so you have it next time..
 

Anak

Rank V
Launch Member

Member III

2,741
Sandy Eggo
I have a 2016 Tundra that is my overland rig and DD.. I also have a '90 Jeep Wrangler that will be eased into this exciting new past time/ way of life and then there is the '66 IH Scout that will be more purpose built as a full time rig..To create a tool set for each rig will be VERY costly. I used to be a Linc/Merc tech and have many types,sets,combinations of tools to be able to have 1 tool set for all 3 rigs and possibly a secondary set of off the wall spares for other people I may be out on the trails with.. The only tool that is needed the most is the one you don't have with you..One of the things I learned when I 1st started at that dealership was if I used someone else's tool that I didn't have more than 3 times, by my own because they won't lend it out anymore.. So when you're out on the trail and ,God forbid, something happens, be sure you pay attention to what it is everybody is needing so you have it next time..

I live this world. All the way down to "if I needed to borrow it three times then I simply need to buy one", and it isn't that folks won't lend it to me again. It simply shows that I need to own that tool.

I have my tool kit broken into sub-kits. There is a kit in each vehicle that is dedicated to that vehicle. That kit involves a somewhat universal socket set/wrench set/hand tools plus the oddball large sockets need for that particular vehicle's transfer case fill plug or axle nut. But then I also have the traveling kit which I move from vehicle to vehicle as trips dictate. That is the kit that contains a scanner, fuel pressure gauge, multimeter, sets of gearwrenches and other things that are a bit too costly to own in multiples. Or at least own in multiples that correspond to my multiple vehicles.
 
  • Like
Reactions: Scout and Boort

grubworm

Rank V
Launch Member

Member III

2,358
louisiana
First Name
grub
Last Name
worm
Member #

17464

Service Branch
USN-Submarines
As someone who has a full size rig, I go a little overboard with my recovery/repair gear. I have a full compliment of tools to almost take my truck completely apart. Not a fan of having to rely on people, especially when they aren't there. I think though, it would be advised just as much to carry commonly broken spare parts as well. Another thing I think I will be throwing in my tool kit would be a 0-150 Ftlb torque wrench with ratcheting head in 1/2" drive. Having a truck that has a GVWR of 3000lbs is nice sometimes.
Ha...I'm with ya on going overboard! Boondocking like my wife and I do, we have to be self-reliant. I always keep my 18v Milwaukee cordless tools with me in the truck and at the least, I highly recommend a cordless drill with various bits and fasteners. I always have some Tek5 self tapping metal screws with me and with a scrap piece of flat bar, I can band-aid any broken weld on the trailer. For about $20 you can buy a nice set of nearly every bit...phillips, star, hex, torx, etc. Pretty handy to have...especially with the low quality of RVs now days, I'm always having to tighten something or add a screw. And of course, duct tape and a small roll of bailing wire. I was on nuke subs in the Navy and you'd be surprised at how much of a sub was repaired with duct tape.
 
Last edited:
  • Like
Reactions: Scout

tundra21

Rank V

Advocate III

1,529
Riverside County, California, United States
First Name
Jim
Last Name
Stein
Member #

11197

You might try this company
I use their standard cable tie and now have a lot of specialized products.
Good Luck
 

Connor_Dobbins

Rank V
Member

Explorer I

1,413
Northwest Chicago Suburb
First Name
Connor
Last Name
Dobbins
Member #

19373

Ham/GMRS Callsign
GMRS: WRHW455
I bought the same tool roll, actually Micheal bought it because I bought it! I haven\'t loaded it yet because I wasn\'t 100% sure what I needed. Thank you for creating this list and for the video! This has inspired mt to FINALLY organize my rig\'s tools. **This thing is super heavy duty, love the quality!**

OH, I\'m just kidding I copied Michael and Corrie.........OB#11480
What is the name/brand of the tool it looks really nice!