Contributor II
Thanks for all of the helpful info. Just passed my technician's test last weekend and looking forward to putting it to use soon!
John
John
Contributor II
Influencer III
13744
All righty! Congratulations!Thanks for all of the helpful info. Just passed my technician's test last weekend and looking forward to putting it to use soon!
John
Enthusiast III
14890
Enthusiast III
14890
I have regrets about not getting my general ticket, then again the code was necessary when i took my testIts a really good idea to go the distance and get the Ham ticket and have the CB also. But please don't stop with the technician only go for the general you wont regret it. We need all the HF guys we can get!!
Off-Road Ranger I
If i get into HF i plan on having a helium assisted vertical antennaI had my HF rig up at expo east but being in a valley with a very compromised vertical antenna and a not very motivated user ment I only heard one local net.
Off-Road Ranger I
Now that is a very interesting idea.If i get into HF i plan on having a helium assisted vertical antenna
Ive seen it used at a Field Day a decade ago. The coax coil and helium tank are the bulkiest bitsNow that is a very interesting idea.
World Traveler III
Off-Road Ranger I
World Traveler III
Great suggestion. I'll check it out for sure.Check out Parks On The Air. National and state parks and forests instead of summits.
Pathfinder III
1632
Enthusiast II
World Traveler III
Pathfinder III
1632
Pathfinder III
1632
thats whats so great about Ham, you have a lot of frequencies to choose from. Here in the Sierra Foothills it is common for people to use 146.400 as a secondary trail frequency. It works well for us mainly because it currently doesn't not interfiear with any local repeater inputs.My family has always used 146.580 as our frequency for communication(pre cell phones)
Sounds great, here on the east coast the interferences can be annoying. I'm considered an old ham at 35yo LoLthats whats so great about Ham, you have a lot of frequencies to choose from. Here in the Sierra Foothills it is common for people to use 146.400 as a secondary trail frequency. It works well for us mainly because it currently doesn't not interfiear with any local repeater inputs.
Each area will do something different, all we did at OB was help with a starting point.
Our comms committee will be publishing information soon regarding Channels and frequencies and they will be working on organizing ham crams throughout the US.
World Traveler III
There are quite a few illegal frequency users here in San Diego as well. When I'm home and around San Diego I primarily use repeaters rather than simplex. I find, generally speaking, that people who use the repeaters and repeater networks are licensed and more polite. Check out some of your local ham clubs. I have a hand held log periodic 5 element 2m/70cm antenna make by Elk antennas. With that I can hit repeaters easily over 100 miles away with my handheld radio. From a local summit in San Diego I could be clearly heard on a repeater on Mt. Wilson in Los Angeles over 120 miles away using only 100mW of power. It works better than the 50W transmitter in my vehicle (but I was on a 1550 ft summit). It's part of my standard overlanding equipment now. Breaks down to a small package. Arrow antennas make good yagi handheld antennas too.Sounds great, here on the east coast the interferences can be annoying. I'm considered an old ham at 35yo LoL
I think I've had my ticket for 23yrs now.
That being said if someone steps on me in simplex I boost up go high power ;) petty I know. Lately there has been alot of illegal frequency use :(