Search results

No problem.

Yep. Been putting it off for some time. Call me Mr. Procrastinator. DIY Custom Lettering. ← click If you need something specific, send them a Email. They'll walk you through it. Amazon. ← click I bought the primer and paint from a local hardware store. KRYLON Gray Primer and KRYLON...

In between a few of these upgrades, I installed bars onto the upper dash tray, to mount electronics. Upper dash tray removed. Items purchased for this are from two bicycle handle-bar phone mount. The lower clamp rings from one set of mounts were removed to be able to attach them to the...

It was time to prep, prime and paint the ShrockWorks front bumper. The 17K winch was then installed and re-tested for proper operation, prior to the installation of the bumper. A few days later, it was time to install the bumper. I later replaced the winch cable hook with a SmittyBuilt...

In between the floor mat and lift installation, I installed the Prodigy P3 trailer brake controller at the lower section of the dash, in easy reach. The front and rear traffic cameras were transferred from the 3/4 ton truck, to the Frontier. A GMRS radio was installed, along with a Comet...

I then began building a Accessory Power board using a section of ABS. Installed 5 relays(four 30/40AMP and one 50 AMP). I added a 12 position Blue Sea fuse block and HD buss-bar. The accessory panel is install above the driver's side kick panel, under the dash. The Fuse & Relay accessory...

I bought this truck mid-summer to replace a 3/4 ton Chevy Duramax Diesel 4x4 and when I got it home, I began setting it up for traveling and doing some off-roading. Frontier crew cab, short-bed 4.0L V6, 4x4, Automatic. First thing I did was install Weather Tech floor mats, front and rear. I...

I like it.

Nice trip and nice pics. Thanks for posting. Will be watching for your update on the route.

The guy in the Brown Truck dropped off my truck-bed rack. I'll unpack it tomorrow to check it out. Maybe begin assembling it this weekend.

Welcome to Overland Bound, Rob.

My co-pilot Kilo, is too old(16) to accompany me anymore. He has aches and pains in his hind legs, so he retired to the couch, or outside bench. Ernie took his place until I can adopt another Dog. He doesn't do a very good job, communication-wise(sounds like a bunch of muffled sounds). Only...

Welcome , Zach.

Hello, Tim. Welcome to Overland Bound.

Hello, Jose. Welcome to Overland Bound.

Austin, Welcome to Overland Bound.

Eric and Gina, Welcome to Overland Bound.

Hi, Peter. Welcome to Overland Bound.

I don't know, but I'm in no hurry to get anywhere fast. Not sure of that. Although, I am sure I'll find out. I here ya.

I have another "Pay it Forward" item. If anyone is in need of a winch-line Fair-lead stop, send me your name and address. It fits a 3/8" winch cable. Hardware is Stainless Steel.