Search results

if you're asking yourself: the stove is just an interim solution. @Rubiconcruiser very kindly offered to help me get a partnersteel high pressure stove ... will tackle this late '17 / early '18

been in contact with bill from partnersteel. 27psi or 1.86bar which is way more than we use over here, but doesn't matter as it comes with hose and regulator. only need an adapter then from POL to EN417. will get back to you later this year, first a couple of other equipment to buy, and trips...

another dead easy one: - tube clips/holder - usb powerbank - usb stick lights

folks, a quick, easy and bargain DIY project for LED awning light that attach to the awning rafter arms: - 60/m 5630 LED Stripe warm white IP65 - aluminum U-section 15x15x2mm - 25/21mm acrylic tube and fitting chair leg caps - 2-core round cord, DIN plug/connector

that fckn awesome mate, greatly appreciated!! we could do over paypal, so everyone's safe. looking forward to your update!! Gesendet von iPhone mit OB Talk

ok, maybe I found a retailer that would ship to germany. but first of all I need to know the operating pressure of the stove to make sure I can get a regulator for EN417 cartridges. I assume it is above 30/50mbar .. ?

then check out the western alps (border FR/IT) as long as they're open. would recommend to take a guided tour, there are several commercial offers around, such as abenteuer4x4 (did a tour with them, they're located in bavaria) or tc-offroad. as robert wrote, distances are short in europe and...

hiking is no big deal, as long as you respect private roads/paths and properties. country lanes and field paths are in general no problem. MOTORIZED is a different animal though :-( Gesendet von iPhone mit OB Talk

yeah, will get one of these in the future. still figuring out how to get it shipped to germany as bargain as possible. cause: naturally those types of goods will not be shipped from e.g. amazon or other retailers 'cross the pond, due to other regulations here for fossile fuel powered devices...

nope, just a few thermo-electric (peltier!) fridges are having a thermostat. and they suck more as double the Amps as a compressor fridge. try ro rent one, but save your money for serious equipment. Gesendet von iPhone mit OB Talk

did, where it crosses bare metal at an risky angle e.g. firewall, b-pillar, c-pillar etc. Gesendet von iPhone mit OB Talk

got ya. yes, would be possible. but you'd lose precious power for running important devices such as your fridge, while you could heat water with propane. your 12V compressor fridge won't run on propane ;-) Gesendet von iPhone mit OB Talk

hot water, no. forget it. 5mins of showering, at least 10kW needed, you can calc for yourself. the rest, easy peasy. Sent from my iPhone using OB Talk

check out the first picture. does this help? or more in depth at each device? Sent from my iPhone using OB Talk

addition for guys in europe, this is the shop were I ordered all the stuff for the diy roof rack on my niva (40mm): http://www.brinck-rohrverbinder.de/shop/Rohrverbinder:::1.html?language=de don't wonder about the mm to inch connections in the listing on the left. makes no sense. focus on the...

like other roof racks for jeep wranglers are mounted: onto the rear bumper, and windshield frame. you could use a variety of these types of mounts: http://www.hollaender.com/files/1/Tech_Data/Part_Drawings/_47_1_15.pdf http://www.hollaender.com/files/1/Tech_Data/Part_Drawings/55_0516.pdf...

did the same for my niva back in 2012: Sent from my iPhone using OB Talk

every MPPT charge controller starts its work at a certain voltage. mine at battery voltage +5V due to specs. so with the panels in series it starts earlier to put out charge voltage and current, and longer. or at last at overcast skies. wattage stays the same, of course. but the weird thing...

I do. After two days of drying I pulled on the battery platform as hard as I could, and the quarter panel (outer, the body) did bend [emoji15] it takes a hammering. Sent from my iPhone using OB Talk

hey guys, didn't know where to place, hope the DIY section is ok. I want to share my installation of a solar powered dual battery and ac-power supply system in our daily driver, without losing cargo space .. frankly, this is LR3/4 specific, but may be adapted to other rigs with similar trunk...