Where did you install your OB emblem?

  • HTML tutorial
Fredward1

Fredward1

Rank II
Launch Member

Off-Road Ranger I

462
St. Louis mo
First Name
Fred
Last Name
Mccue
Member #

13713

Ham/GMRS Callsign
W1mcq
Finally got my emblem #13713. Which is crazy since I saw someone post their badge #5000 something in just March 2017! This community is growing fast.

So I went to Home Depot and spent a good 30 min in the hardware section brainstorming how to do this.
IMG_2692.JPG
IMG_2694.JPG

Here’s all the parts I got IMG_2683.JPG

I found something called an elevator bolt (middle bottom of the picture above) which was perfect. A large flat head. It honestly would have probably been just fine by itself with a washer on the back but I wanted more to contact the 3m adhesive so I got some of these rubber washers IMG_2684.JPG

Then I got a ring washer to push on the rubber washer but not the elevator bolt because the elevator bolt has a slight taper on the underhead IMG_2685.JPG

Then I went a little overkill. I put fender washer so there would be pressure on the large ring washer and the bolt. And then I wanted only rubber to contact the grill IMG_2686.JPGIMG_2687.JPG

Then it was just a rubber washer, fender washer, and a wing nut for the back IMG_2689.JPG

Hopefully it all stays together.
 
  • Like
Reactions: SP3CTRE, rb9228, Suzuki14258 and 17 others
Nomadik Nova

Nomadik Nova

Rank VI
Staff member
Member

Member III

3,278
Falmouth, MA, USA
First Name
Kevin
Last Name
Nova
Member #

10331

Fredward1 said:
Finally got my emblem #13713. Which is crazy since I saw someone post their badge #5000 something in just March 2017! This community is growing fast.

So I went to Home Depot and spent a good 30 min in the hardware section brainstorming how to do this.
View attachment 67411
View attachment 67412

Here’s all the parts I got View attachment 67414

I found something called an elevator bolt (middle bottom of the picture above) which was perfect. A large flat head. It honestly would have probably been just fine by itself with a washer on the back but I wanted more to contact the 3m adhesive so I got some of these rubber washers View attachment 67413

Then I got a ring washer to push on the rubber washer but not the elevator bolt because the elevator bolt has a slight taper on the underhead View attachment 67415

Then I went a little overkill. I put fender washer so there would be pressure on the large ring washer and the bolt. And then I wanted only rubber to contact the grill View attachment 67416View attachment 67417

Then it was just a rubber washer, fender washer, and a wing nut for the back View attachment 67418

Hopefully it all stays together.
Click to expand...
Love this idea! Might need to move mine now. [emoji16]

Thanks for the pics too.
 
  • Like
Reactions: Fredward1
Anthony 1972

Anthony 1972

Rank III
Launch Member

Advocate II

841
Virginia
First Name
Anthony
Last Name
Grant
Member #

14218

Alex_Kulbaka said:
I've purchased my emblem couple of days ago and trying to decide where to install mine once I receive it. I have Jeep Wrangler that comes with Trail Rated badge on the driver side fender. I know most people install their OB emblems exactly in that spot. I was thinking either installing mine on the passenger side fender or rear tail gate.
Click to expand...
So where did you install yours? Let's see it!
 
You must log in or register to reply here.
Top Bottom