What is the last thing you bought and plan to buy?

[Lanlubber In Remembrance]

LOL Thanks for the reminder. Semi fortunate to be currently single. I can get away with too darn much these days!

Single is great too, so am I. That's why I get to go camping now. Before she died I had to check her into a motel while I was gone. Cant be spending from both ends of the checkbook though ! Happy Trails Partner

Rear bench seat to swap out for the standard jump seats in my '80 BJ42. Next is a roof rack.

That's an absolutely necessity if you don't have a camp trailer (IMHO) ! I just got mine and now I don't have to put all my gear in the rig.

 

[Lanlubber In Remembrance]

I just ordered my new tires for my LRD2. Bought something I know nothing about but for me the price and tread design and rating made me do it. LOL

https://www.discounttiredirect.com/buy-tires/milestar-patagonia-m-t/p/31814

 

[Lanlubber In Remembrance]

Also ordered the spring spacers for the larger tires, I didn't need much so I went with the spacers that didn't require any other modifications with the tires I bought.

Discovery II – LK8 Parts & Accessories

www.lucky8llc.com

Discovery II – LK8 Parts & Accessories

www.lucky8llc.com

 

[Lanlubber In Remembrance]

Wheel spacers too !

Billet Wheel Spacers - 4, 5, 6 and 8 lug.

Virtually every lug pattern for every vehicle imaginable with prices starting at $25 each if buying a set of four 1 inch thick. 8 Lug spacers starting at $40 each. These brand new Billet Aircraft...

tucson.craigslist.org

 

[Cpol]

arb twin compressor

 

[PNW EXPLR]

Just bought,


Want to get a winch.

 

[AnywhereInTX]

Corner LED lights installed today. Everything went fairly smooth except for those cheap chinese crimp connectors.

 

[DrivingTacoLoco]

Corner LED lights installed today. Everything went fairly smooth except for those cheap chinese crimp connectors.

I've abandoned crimp connectors. I've been soldering everything I can.

 

[AnywhereInTX]

I've abandoned crimp connectors. I've been soldering everything I can.

I'm in the same boat, I just ran out of the heat shrink/solder combo connectors. I'm just glad they work right now until I can fix them properly.

 

[RoarinRow]

Ordered a swing out hitch tire carrier to keep my 35” spare tire. I originally bought a spare tire mount for my Yakima Mega Load Warrior rack but I couldn’t lift the spare tire on to the rack lol.

 

[leeloo]

found a Redarc BCDC charger, the 40 Amp one, on sale,.. could not resist. I have a VSR at the moment, works well but I need to add solar for longer stays, so 100W solar panels are next.

 

[DrivingTacoLoco]

found a Redarc BCDC charger, the 40 Amp one, on sale,.. could not resist. I have a VSR at the moment, works well but I need to add solar for longer stays, so 100W solar panels are next.

Where is it on sale?

 

[Lanlubber In Remembrance]

Ordered a swing out hitch tire carrier to keep my 35” spare tire. I originally bought a spare tire mount for my Yakima Mega Load Warrior rack but I couldn’t lift the spare tire on to the rack lol.

Do you have any info on the hitch type carrier ?

 

[RoarinRow]

Do you have any info on the hitch type carrier ?

I ordered the XL swing out version from here - Hitchgate™ Solo

 

[Lanlubber In Remembrance]

I ordered the XL swing out version from here - Hitchgate™ Solo

Oh Wow, I had no idea of the cost. As nice as it is I am sure it is worth it if one "has it" to spend. I'll have to take that one off my wish list of wants and may build my own simple version. Thank you SIr

 

[RoarinRow]

Oh Wow, I had no idea of the cost. As nice as it is I am sure it is worth it if one "has it" to spend. I'll have to take that one off my wish list of wants and may build my own simple version. Thank you SIr

I agree, if you've got the skills, then it'd be worth while and more cost effective to make your own.

 

[Lanlubber In Remembrance]

I agree, if you've got the skills, then it'd be worth while and more cost effective to make your own.

I don't do everything but I like to cut the parts out and tack them together and take them to a professional welder. The fab cost is where all the time is in making things. My eyes aren't what they use to be or I would weld it myself. I'm having to do the same thing with my off road bumpers when I can get back on my feet again. I'm down for the time being and itching to get back to my build.

 

[RoarinRow]

I don't do everything but I like to cut the parts out and tack them together and take them to a professional welder. The fab cost is where all the time is in making things. My eyes aren't what they use to be or I would weld it myself. I'm having to do the same thing with my off road bumpers when I can get back on my feet again. I'm down for the time being and itching to get back to my build.

Good luck and hope you find the time and resources to get'er done.

 

[sabjku]

Upgrading from the OME shocks and springs to the Falcon 3.3's and Teraflex Outback's. Definitely looking forward to the adjustable 3.3's.

 

[Lanlubber In Remembrance]

Upgrading from the OME shocks and springs to the Falcon 3.3's and Teraflex Outback's. Definitely looking forward to the adjustable 3.3's.View attachment 113768

Let us know how it preforms after the mod's.