Enthusiast I
- 404
- First Name
- Robert
- Last Name
- Burton
- Member #
-
29695
Hello,
When airing down, what pressure do you all run?
Thanks,
Rob
When airing down, what pressure do you all run?
Thanks,
Rob
Enthusiast I
29695
Trail Blazer I
15310
World Traveler III
24720
I usually just go to 20psi if I am airing down. I don’t have beadlocks and I am not an extreme rock crawler or anything so I don’t want to see how low I can go. 20 is a lot smoother than 35 for sure though lolHello,
When airing down, what pressure do you all run?
Thanks,
Rob
Trail Blazer I
15310
Member III
Enthusiast I
29695
I usually just go to 20psi if I am airing down. I don’t have beadlocks and I am not an extreme rock crawler or anything so I don’t want to see how low I can go. 20 is a lot smoother than 35 for sure though lolHello,
Awesome, thanks for the info.
When airing down, what pressure do you all run?
Thanks,
Rob
This is a good question
Enthusiast I
29695
That’s a great break down for us newbies. Thanks for the info.Depends for me. I run skinny 33s so I'll break down below. Once I go back to a wider tire I'll be able to come back down more.
Road: 39 PSI
Gravel: 32-30 PSI
Dirt/Multi: 30-27 PSI
Rock: ~ 26 PSI
Mud/Sand: 22-20 PSI
Trail Blazer I
15310
No problem. Obviously like others stated your mileage will vary based on rig, tire size, tire load rating, rig weight and other factors. So I'd suggest using @terryg's suggestion until you dial in your own settings.That’s a great break down for us newbies. Thanks for the info.
World Traveler III
24720
So many factors , e rated thick tires on a light rig go down to 8 psi in snow , same tires on a heavy rig 15 psi . Matters so much on terrain/weight /speed of travel / tire construction. Really it’s one of those experiment things . Do a truck test and find out what your street psi is and go from there.
Edit , chalk test not truck test .
Trail Blazer I
15310
Yes chalk test is a great one. However if you don't fancy as much trial and error I'd recommend this tool. Tested the cacluation with the chalk test and came out perfect.The chalk test is gold! I wish I knew about that sooner
World Traveler III
24720
Off-Road Ranger I
0745
Interesting; I attempted that method with E rated BFGs. Could never really determine 75% of what? Flat? To the OP, Our wagon, when loaded is at its GVWR 6900lbs +/- and does quite well at 20lbs, down from 36lbs in every sort of terrain one might cover. I aired down to 12lbs only once and aired back up ASAP as it was quite uncomfortable floating like that, along with the possibility of popping a bead. HAVE FUNIn his book, Shifting into 4WD: The SUV Owner's 4WD Handbook, Harry Lewellyn instructs to lower the air pressure so the sidewall is 75% the height of the correct on-pavement air pressure. Then, record what that air pressure for future reference. I like this approach because it negates the effect of weight of the vehicle and contents which vary as well as tire size.
Member III
Trail Blazer I
15310
I read it as 3/4 of fully inflated. Based on that mine would be ~6 3/8" compared to my 8 1/2" sidewall at full load inflation. I'll do some testing this weekend and report back on what psi that 75% sidewall comes back as.Interesting; I attempted that method with E rated BFGs. Could never really determine 75% of what? Flat? To the OP, Our wagon, when loaded is at its GVWR 6900lbs +/- and does quite well at 20lbs, down from 36lbs in every sort of terrain one might cover. I aired down to 12lbs only once and aired back up ASAP as it was quite uncomfortable floating like that, along with the possibility of popping a bead. HAVE FUN
Influencer I
Hello,
When airing down, what pressure do you all run?
Thanks,
Rob