Awesome thanks for responding, you have a very nice looking build.
Am I seeing it right that you were also able to run a tonneau cover with your bed rack?
Am I seeing it right that you were also able to run a tonneau cover with your bed rack?
Traveler III
Correct here are the mods, I under lined the cover, to be able to use it a had to get a kit that Rci makes for their Racks
Fab Four CS19-X4051-1 matrix front bumper
Stealh torch grille
12k winch
Bds 4’ suspension lift
Fox 2.5 DSC coil over shocks (front)
Fox shocks (rear)
35x12.5 20 nitro Rodger Grappler tires
20” Procomp Rims
Rci 18” Bed Rack
*The BAK Revolver X2 tonneau cover *
Smitty Built RTT
Road Shower
Arb Tred recovery boards
4.5 Gallon Rotopax (2)
3.5 Gallon ROtopax (2)
50” dual Light bar
Rigid ditch lights
Rigid Fog lights
Ultra swing tire carrier
Front Runner table
High Lift Jack
Arb Dual air compressor
Dometic cfx75 Ref/Freezer
Dual battery set up
Fab Four CS19-X4051-1 matrix front bumper
Stealh torch grille
12k winch
Bds 4’ suspension lift
Fox 2.5 DSC coil over shocks (front)
Fox shocks (rear)
35x12.5 20 nitro Rodger Grappler tires
20” Procomp Rims
Rci 18” Bed Rack
*The BAK Revolver X2 tonneau cover *
Smitty Built RTT
Road Shower
Arb Tred recovery boards
4.5 Gallon Rotopax (2)
3.5 Gallon ROtopax (2)
50” dual Light bar
Rigid ditch lights
Rigid Fog lights
Ultra swing tire carrier
Front Runner table
High Lift Jack
Arb Dual air compressor
Dometic cfx75 Ref/Freezer
Dual battery set up
I really appreciate the list. I am starting to build mine and man the possibilities, but I was running into the questions of compatible items (like the tonneau cover with bed rack, best fridge with tonneau cover). I hope to have some updates later this year as I plan to start ordering items very soon. I see a lot a similar items on your build that I had written down already. Keep the photos coming.
Traveler III
I know what you mean, when I first started mine there was almost no info, now there is a lot more, but definitely I’ll keep posting and don’t Hesitate to ask if there are any questions, I can tell you it’s been lots of fun. I can’t wait to see some pics once your rig is built
![[DO]Ron](/forums/data/avatars/m/5/5154.jpg?1711577950){kind=avatar}
Member III
We finally had some 'real' snow. It has been years. One of the few times I can really appreciate the 4x4 and BFG's on the Land Cruiser. So much people struggle even to get into a parking spot, and this thing just drives with 0 loss of grip, anywhere.
Sudingusnavy
Rank III
Contributor III
World Traveler III
- 5,483
- First Name
- Dustin
- Last Name
- Helms
- Member #
-
24720
- Ham/GMRS Callsign
- KD2UNH
- Service Branch
- USAF
His and hers... both 4WD automatics. 2000 frontier and 2003 xterra. Just went outside to take this to share
Attachments
Enthusiast III
World Traveler III
- 5,483
- First Name
- Dustin
- Last Name
- Helms
- Member #
-
24720
- Ham/GMRS Callsign
- KD2UNH
- Service Branch
- USAF
Moving some of my junk.
The truck in its new home.
The small vehicle overlander.
The truck in its new home.
The small vehicle overlander.
Traveler III
Here’s is my 2018 Taco. We found some good powder this day.
Attachments
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
-
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
Sadly that isn’t all of it either. I’ve got an 04 Tahoe. The daily driver.
71 bronco - needs a new tub bad. Lots of cancer.
79 bronco - runs decent for having a boat anchor of an engine, original 400m, but it’s starting to lose oil pressure. I’ve got a new engine and trans ready for it. Just hoping to clear some garage space before it goes.
71 bronco - needs a new tub bad. Lots of cancer.
79 bronco - runs decent for having a boat anchor of an engine, original 400m, but it’s starting to lose oil pressure. I’ve got a new engine and trans ready for it. Just hoping to clear some garage space before it goes.
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
-
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
So you saved the best for last I see. At least there are plenty of parts available for the Broncos.
The 71 is kind of a long term restoration project still in the planning stages. I’ve got an idea in my head of how I want it. But very far from execution of any of it. For the 79 - There is an early 12 valve and nv4500 sitting in my shop waiting for the 400m to give up completely. I’ve got the adapters for the transfer case. Need to get a little shop space and some of the wife’s projects done first. Just got a new house and shop on 10 acres of bare dirt and sagebrush. I have a lot of work coming up as soon as the weather warms up.
Enthusiast III
Small day outing at a local lake/park and took a few photos of the little rig
Some recents.
Attachments
If you want, add your rig to our awesome Gallery on TrailbuiltOffroad.com and you could be featured on our sites!
Add your Rig here -----> TrailBuilt Off-Road Fitment Gallery
Add your Rig here -----> TrailBuilt Off-Road Fitment Gallery
Attachments
Member III
- 2,827
- First Name
- Jim
- Last Name
- covey sr
- Member #
-
16986
- Ham/GMRS Callsign
- none - BREAKER BREAKER HAND HELD CB AND WALKIE TALKIE
I hear ya. Gotta keep momma happy. You have a lot to look forward to it looks like. Keep us informed on your projects.
