Agreed. I own a 1973 MGBGT. Lucas sucks...
Post Up Your Cockpit
- Thread starter A10MileHusker
- Start date
Love Powerwerx. Everything got converted to powerpoles in my jeep. Such flexibility now!
Great website Powerwerx. I have even used their low voltage cutoffs, gauges, gauge pods, wiring, etc. All quality stuff. I have their battery box with the Powergate attached as well for home emergency.
Discovering Anderson Powerpoles was accompanied by angelic music in the background I believe. :)
I hate cig lighter sockets!
Experimenter II
Experimenter II
![[DO]Ron](/forums/data/avatars/m/5/5154.jpg?1711577950){kind=avatar}
Member III
My cockpit :) fairly standard 120 series Land Cruiser with an added Kenwood HU with CD/DVD and Android Auto capability.
Contributor I
Vector bar and 67 designs mounts for iPhone and iPad
Experimenter II
BaseCamp1 Rubicon- Vector Offroad dock, ARB remote fridge Monitor, Garmin Inreach explorer + Ram spine mount, Mob Armor phone claw mount, rigid mini inverter, overhead console with CB and ham radio, Condition Zero pistol mount, Bartac Ballistic sear covers with molle attachments
Experimenter II
spartancrating1,
What box is that you are using on the rooftop?
Looks pretty heavy duty.
What box is that you are using on the rooftop?
Looks pretty heavy duty.
It's a Pelican Vault V800 and the other 3 smaller boxes are just the stacking Rigid boxes from Home Depot. The Vault is pricey at $200 but the Rigids are rock solid and are super cheap. Never had one leak or go bad on me and they are great for stashing recovery gear.
Off-Road Ranger I
Here's my current cockpit setup:
I customized my dash to integrate some radio connections and USB ports directly into it so that I could hide all the ugly wires that were running all over the place. Video on the process is up on my YouTube channel:
I customized my dash to integrate some radio connections and USB ports directly into it so that I could hide all the ugly wires that were running all over the place. Video on the process is up on my YouTube channel:
Ram Mount, JB Weld, Dremel, labels.... You have used all the holy words!
Nice job.
I really like the RJ45 connectors you found and that USB 4 port box. Where did you find those?
Same here, I got tired of the mess and ended up replacing the entire center console with a unit from Ram Mount (posted above) so I could mount the head units, switches, fuse block, etc. AND MOST IMPORTANTLY, CUP HOLDERS THAT DON'T FAIL IF YOU HIT THE BRAKES!
GM did not make any of this easy. Getting through the firewall proved to be a nightmare. I used a lot of small gauge wiring out to the engine compartment and relays from the switch circuit.
I had no way to mount a bar like that on the dash of a Suburban so haven't gone there. Ram Mount has a new track that I am considering that could alleviate that problem and provide great mount possibilities. Ram Mount is the Erector Set of car stuff.
www.rammount.com
Nice job.
I really like the RJ45 connectors you found and that USB 4 port box. Where did you find those?
Same here, I got tired of the mess and ended up replacing the entire center console with a unit from Ram Mount (posted above) so I could mount the head units, switches, fuse block, etc. AND MOST IMPORTANTLY, CUP HOLDERS THAT DON'T FAIL IF YOU HIT THE BRAKES!
GM did not make any of this easy. Getting through the firewall proved to be a nightmare. I used a lot of small gauge wiring out to the engine compartment and relays from the switch circuit.
I had no way to mount a bar like that on the dash of a Suburban so haven't gone there. Ram Mount has a new track that I am considering that could alleviate that problem and provide great mount possibilities. Ram Mount is the Erector Set of car stuff.
RAM® Tough-Track™ Mounts
Using a track mounting system is a clean, clever, and innovative way to mount multiple devices in virtually any application. The RAM® Tough-Track™ takes this innovation to the next level by offering a center access point for your track components and multiple track lengths to accommodate your...
www.rammount.com
That Pelican is really nice and long. I had not thought about those Rigids but you're right, really nice, great handles, decent lock location, seals. Will have to reconsider. I have a similar unit from DeWalt but for some reason, didn't think of it as a rooftop box. I use it for a power supply unit with full size AGM battery. I do think the Rigid line is better.
ToughSystem® DS130 | DEWALT
The ToughSystem® DS130 case features durable and thick structural foam walls, integrated water seal and rust-resistant metal latches. Storage pockets on the lid and 4 removable cups allow for ...
www.dewalt.com
Off-Road Ranger I
Haha, yes, some of my favorite things!! thank you for watching!
I found them all on Amazon. The 4-port box was pure dumb luck, i accidentally ran across it while looking for something else. Click through to the YouTube page for that video and check the description, I have Amazon links to all the items i used.
Enthusiast III
Enthusiast III
Minus the windshield
mounted GoPro. I finally found something for that little tray by the door handle.
mounted GoPro. I finally found something for that little tray by the door handle.