OB emblems Oxidizing

  • HTML tutorial

Crusty Overland

Rank V
Launch Member

Enthusiast III

1,721
Nashua, New Hampshire
First Name
Alex
Last Name
Levesque
Member #

9940

Has anyone else had their OB emblem oxidize?
Mine is less than two months old and it’s turning a white color. Is there something I can do to bring it back to what it was?




Sent from my iPhone using OB Talk
 

Crusty Overland

Rank V
Launch Member

Enthusiast III

1,721
Nashua, New Hampshire
First Name
Alex
Last Name
Levesque
Member #

9940

Has anyone else had their emblem oxidize? We’ve had ours less than a month and it’s turning whiter and chalky. Any help would be great!




Ig: @crusty_rustys_restoration
#OB9940
 

Michael

Rank IX
Staff member
Founder 500
Member

Benefactor

15,584
Auburn, California, United States
First Name
Michael
Last Name
Murguia
Member #

0000

Ham/GMRS Callsign
KM6YSL
Thank you sir!

Ig: @crusty_rustys_restoration
#OB9940
Wow! That's too fast. We have seen emblems oxidize in certain regions (mine are still fine after 4 years, but California), but we have not seen emblems oxidize this quickly. As @Chris Jones said, we'll replace it/them. I'll put this in the queue now. It will take a while for the emblems to be manufactured.

We are also going to send you a protectant spray so you can test it in the field. If it works, we'll recommend this to other members as well.

Cheers,

M
 

Mike W

US MidWest Region Local Expert
Staff member
Member
Investor

Expedition Master III

3,833
Iowa, USA
First Name
Mike
Last Name
IowaLR4
Member #

538

@Michael May I ask what the spray is? The salt in Iowa is brutal, but #538 is holding up pretty well. I try to keep the rig clean, and the badge.
 
  • Like
Reactions: Michael

MA_Trooper

Rank VI
Launch Member

Influencer II

3,969
Methuen, MA
First Name
Chris
Last Name
BRV
Member #

0520

I think badge placement matters for salt. I am happy to report that 0520 doesn't have a spec of oxy. It's located on the rear swing door just above the bumper and is pretty protected from splatter.
 
  • Like
Reactions: Michael

Mike W

US MidWest Region Local Expert
Staff member
Member
Investor

Expedition Master III

3,833
Iowa, USA
First Name
Mike
Last Name
IowaLR4
Member #

538

I think badge placement matters for salt. I am happy to report that 0520 doesn't have a spec of oxy. It's located on the rear swing door just above the bumper and is pretty protected from splatter.
That is where mine is. But everything below the roof line gets violently assaulted with road salt. Especially the back. All the fallout and spray from the tires gets sucked back against the rear. But then again.. I drive a barn shaped vehicle.
 
  • Like
Reactions: Michael

MA_Trooper

Rank VI
Launch Member

Influencer II

3,969
Methuen, MA
First Name
Chris
Last Name
BRV
Member #

0520

That is where mine is. But everything below the roof line gets violently assaulted with road salt. Especially the back. All the fallout and spray from the tires gets sucked back against the rear. But then again.. I drive a barn shaped vehicle.
I don't mean to say that you should avoid applying the emblem somewhere based on where it will be hit with salt. The emblem shouldn't rot. I think mine is just in the one small spot that doesn't get caked with it.
 
  • Like
Reactions: Michael

Crusty Overland

Rank V
Launch Member

Enthusiast III

1,721
Nashua, New Hampshire
First Name
Alex
Last Name
Levesque
Member #

9940

I don't mean to say that you should avoid applying the emblem somewhere based on where it will be hit with salt. The emblem shouldn't rot. I think mine is just in the one small spot that doesn't get caked with it.
Ours isn’t on the front drivers fender right below the Ranger badge. Takes a beating with the New Hampshire salt and sand. Just can’t believe it was that quick
 

jordan04gx

Rank V
Launch Member

Enthusiast III

1,828
Chittenango, NY
First Name
Jordan
Last Name
Moore
Member #

9411

Ham/GMRS Callsign
KD2NFZ
After installing the emblem, spray it with Fluid Film, and wipe off the excess. It will stay protected for a good long while. I have rotors out next to my house that I set up as a test 1.5 years ago, and the one I treated is still beading up when it rains. The one I did not treat is severely rusted.
 

Steve

lost again...
Founder 500
Launch Member

Traveler III

4,312
Lorain County, OH, USA
First Name
Steve
Last Name
None
Member #

202

When I took mine off, I scrubbed it with toothpaste and baking soda, and then polished with Simichrome. Then I sprayed on two or three coat of satin clear coat. It has held up a lot better to Ohio's salty roads than the uncoated badge.
 
E

expeditionnorth

Guest
Mine has stayed the same for years
I think it was the road salt the first winter it was on
clean it with CLR and then clear coat
 

Wawa Skittletits

Local Expert East Region USA
Staff member
Launch Member
Member

Expedition Master I

5,079
Wilkes-Barre, PA, USA
First Name
Drew
Last Name
Hawley
Member #

1537

Ham/GMRS Callsign
WRBZ674
Service Branch
USN veteran
Two winters marinating in Pennsyltucky salt and some days mine looks a little rough and others it looks fine. All depends on how well it gets cleaned.

Have seen some oxidiation on 2 of my badges, but the way I see it that just adds character. :)
I agree and feel the same way about every pinstripe down the side of the wagon.