DIY Faucet in a 5 Gallon Water Can

  • HTML tutorial
RoarinRow

RoarinRow

Rank V
Launch Member

Member III

2,771
Elk Grove, CA, USA
First Name
Rolando
Last Name
Nispiros
Member #

17011

Ham/GMRS Callsign
KN6JJS
Not sure if you'all watched Mike's video on 'DIY Faucet in a 5 Gallon Water Can' on YouTube, but I was inspired to do the same.


I bought a 12v cigarette lighter adapter, cut the end off and hooked to my solar, electrical system inside the bed of the truck.

IMG_4520.jpeg

IMG_4525.jpeg

IMG_4526.jpeg

Connected the source and can via anderson plugs.

IMG_4528.jpeg

 
  • Like
Reactions: jimmynotjim, ryno9562, Atlost67 and 5 others
mep1811

mep1811

Rank IV

Pathfinder I

1,212
El Paso, Texas
First Name
Michael
Last Name
Perez
Last edited:
  • Like
Reactions: Atlost67, Lanlubber In Remembrance and KonzaLander
RoarinRow

RoarinRow

Rank V
Launch Member

Member III

2,771
Elk Grove, CA, USA
First Name
Rolando
Last Name
Nispiros
Member #

17011

Ham/GMRS Callsign
KN6JJS
mep1811 said:
Parts list?

Plastic Water Can, Desert Sand, 5-gallon: https://amzn.to/2JafoH9

Clear Vinyl Tubing: https://amzn.to/3biAcZ5

12V Portable Submersible Water Pump: https://amzn.to/2xWL5Bg

12V Electric Water Faucet with a switch : https://amzn.to/39ktdxu

Fastronix 2 Pack Weatherproof Grommets for Wire Bundle: https://amzn.to/2wANBgn
Click to expand...
I believe the grommet you listed above it the right size. The one I got was too big so I did not use it. Just drilled hole, slipped wires through, then siliconed around it.
 
diabetiktaco

diabetiktaco

Local Expert New Jersey, USA
Launch Member
Member

Explorer I

3,650
Marlboro Township, NJ, USA
First Name
Eric
Last Name
Beauchea
Member #

4723

In the bed of my truck I have the OEM plug which is useless. I also have a blue sea 12V plug and 2 USB I installed. I use the 12v plug for my fridge. So I wonder if this pump would get enough power off the USB plug or am I better off putting a 2 way into the single 12V plug?
 
RoarinRow

RoarinRow

Rank V
Launch Member

Member III

2,771
Elk Grove, CA, USA
First Name
Rolando
Last Name
Nispiros
Member #

17011

Ham/GMRS Callsign
KN6JJS
diabetiktaco said:
In the bed of my truck I have the OEM plug which is useless. I also have a blue sea 12V plug and 2 USB I installed. I use the 12v plug for my fridge. So I wonder if this pump would get enough power off the USB plug or am I better off putting a 2 way into the single 12V plug?
Click to expand...
I was thinking about that as well. This way the setup would be more portable with more power options. The wires coming out of the faucet are pretty thick, maybe 12 gauge. Last time I opened up a USB wire it looked like a 16 gauge?
 
diabetiktaco

diabetiktaco

Local Expert New Jersey, USA
Launch Member
Member

Explorer I

3,650
Marlboro Township, NJ, USA
First Name
Eric
Last Name
Beauchea
Member #

4723

RoarinRow said:
I was thinking about that as well. This way the setup would be more portable with more power options. The wires coming out of the faucet are pretty thick, maybe 12 gauge. Last time I opened up a USB wire it looked like a 16 gauge?
Click to expand...
Yeah I think the USBs only put out 2.5A. I'm just going to hold off. I'm looking for projects to keep me busy right now and this looked like fun but after the $177 is said and done I'll be back to where I was again and not need it.
 
  • Like
Reactions: Lanlubber In Remembrance and RoarinRow
Charles M

Charles M

Rank V
Launch Member

Member III

2,771
Wickenburg, AZ, USA
First Name
Charles
Last Name
M
Member #

17640

Ham/GMRS Callsign
K1CJM
I used a 7 gallon Aquatanier and a pump and switch off amazon and some wire hose and other stuff I had laying around and made this one for around $50.00 It certainly is not as fancy but it works for us.

20190918_132117.jpeg

Below is not our normal set up. The 7 Gallon jug will sit to the left of the tire and in a mount behind the table and we use a collapsible sink sitting on the table under the water pipe. It is deceiving but, both wooden tables are over 2 feet long.

table145608.jpg
 
  • Like
Reactions: ButcherShop, mface7 and RoarinRow
RoarinRow

RoarinRow

Rank V
Launch Member

Member III

2,771
Elk Grove, CA, USA
First Name
Rolando
Last Name
Nispiros
Member #

17011

Ham/GMRS Callsign
KN6JJS
Charles M said:
I used a 7 gallon Aquatanier and a pump and switch off amazon and some wire hose and other stuff I had laying around and made this one for around $50.00 It certainly is not as fancy but it works for us.

View attachment 147991

Below is not our normal set up. The 7 Gallon jug will sit to the left of the tire and in a mount behind the table and we use a collapsible sink sitting on the table under the water pipe. It is deceiving but, both wooden tables are over 2 feet long.

View attachment 147992
Click to expand...
I could have used the same blue container but it’s in storage lol. Love that hitch setup. Always have.
 
Ctblackmon

Ctblackmon

Rank IV
Member

Enthusiast III

1,365
Merryville La
First Name
Caleb
Last Name
Blackmon
Member #

19558

RoarinRow

RoarinRow

Rank V
Launch Member

Member III

2,771
Elk Grove, CA, USA
First Name
Rolando
Last Name
Nispiros
Member #

17011

Ham/GMRS Callsign
KN6JJS
Ctblackmon said:
Not sure what happened. But that’s a cool idea. That’s something I’m going to have to do for my rig.
Click to expand...
It easy to do. You could probably improvise as far as the container is concerned. I didn't end up using the grommet. But everything else listed in the OB video, I used.
 
  • Like
Reactions: Ctblackmon
You must log in or register to reply here.
Top Bottom