Cb antenna location

  • HTML tutorial

Louie559

Rank VI
Launch Member

Influencer I

3,900
Long Island, Ny
First Name
Lou
Last Name
Rom
Member #

7274

hey all! so i have question, i have a cb antenna it’s about very little higher then my roof, i want to put it on my hood, my question is that going to work well or would i need a longer antenna?
 

RoarinRow

Rank V
Launch Member

Member III

2,771
Elk Grove, CA, USA
First Name
Rolando
Last Name
Nispiros
Member #

17011

Ham/GMRS Callsign
KN6JJS
hey all! so i have question, i have a cb antenna it’s about very little higher then my roof, i want to put it on my hood, my question is that going to work well or would i need a longer antenna?
I have a hood channel mount and gets a very good SWR reading.

01FA95F7-9974-490A-BBDE-DDAA48169FBB.jpeg
 

NSAdv

Rank II
Launch Member

Contributor III

327
Nova Scotia, Canada
First Name
Joshua
Last Name
Eaton
Member #

11629

hey all! so i have question, i have a cb antenna it’s about very little higher then my roof, i want to put it on my hood, my question is that going to work well or would i need a longer antenna?
My father had an old set of dual-phase antennas attached to his side mirrors and they worked fine. No issues what so ever
 

Louie559

Rank VI
Launch Member

Influencer I

3,900
Long Island, Ny
First Name
Lou
Last Name
Rom
Member #

7274

sounds good thanks yall for the comments, ill check it out and see what happens appreciate it
 

El-Dracho

Ambassador, Europe
Moderator
Member
Supporter
Investor

Off-Road Ranger III

13,288
Lampertheim, Germany
First Name
Bjoern
Last Name
Eldracher
Member #

20111

Ham/GMRS Callsign
DO3BE
The best thing to do is try it out in that location a number of times. Change or upgrade only if you start feeling it would improve things.
Agree. Would try the intended location first before upgrading. Have my CB antenna near the a pillar, the SWR reading is not very good but ok. This is caused by the nearby rollcage and snorkel. So it really depends on the rig and other mods.
 

Louie559

Rank VI
Launch Member

Influencer I

3,900
Long Island, Ny
First Name
Lou
Last Name
Rom
Member #

7274

thank you all for the help, i’ll post a picture as soon as i find the right spot. appreciate you all thank you
 
  • Like
Reactions: RoarinRow

M Rose

Local Expert
Mod Team
Member

Advocate III

5,584
Northeast Oregon, United States
First Name
Michael
Last Name
Rose
Member #

20990

Ham/GMRS Callsign
W7FSB
Service Branch
US ARMY Retired
I’m going to jump in here... just because you have great SWR readings doesn’t mean your signal is coming in (or going out) very well. The hood is a poor location when trying to reach someone behind you because your vehicle acts as a reflector and reflects the signal to the front of you... the same happens in reverse when mounted on the rear bumper and the antenna doesn’t clear the roof line... the best place for a CB antenna is on the center of the roof, or if running a full 1/4 wave antenna then where at least half the antenna is above the roof line.
 

El-Dracho

Ambassador, Europe
Moderator
Member
Supporter
Investor

Off-Road Ranger III

13,288
Lampertheim, Germany
First Name
Bjoern
Last Name
Eldracher
Member #

20111

Ham/GMRS Callsign
DO3BE
Form my experiences it is always a kind of trade of with the mounting psition. Form a technical point of view of course it is a very good position to have the antenna in the middle of the roof. But this is for my purposes a no go as the rig is already 2.3m high and more is not feasible while overlanding (low archways in nice old-towns, overhead lines, trees and so on), in the middle of a desert of course no problem.
 

Prerunner1982

Local Expert, Oklahoma USA
Launch Member
Member

Member III

3,372
Navina, Oklahoma
First Name
Jon
Last Name
B
Member #

16274

Front fender mount should work fine, not great but decent.
I would suggest running some braided ground straps from the hood to the body if your vehicle does not currently have any. This can help with RFI and it adds the hood to the overall ground plane.
 
  • Like
Reactions: El-Dracho

Prerunner1982

Local Expert, Oklahoma USA
Launch Member
Member

Member III

3,372
Navina, Oklahoma
First Name
Jon
Last Name
B
Member #

16274

I run my CB antenna on a fender mount as well, mainly due to the fact the roof is occupied and it's the least of the comms so I wasn't as concerned about it.
SWR is somewhere around 1.0-1.1 and it works fine for what it is.
XJ Comms antennas2.jpg
 

OverlandZJ

Rank II

Enthusiast III

473
Bristol,Pa
First Name
John
Last Name
John
I only use the CB for running in a group, not trying to communicate beyond line of sight typically. Honestly, i probably would not have one these days if not for the weather channel.
 
  • Like
Reactions: RoarinRow

Dlnuckolls

Rank V

Off-Road Ranger I

1,503
Shepherdsville, KY, USA
First Name
David
Last Name
Nuckolls
Member #

27074

Ham/GMRS Callsign
KO4WHV
I used the Teraflex hinge mount on my Wrangler with a 5’ firestik antenna and get a 1.0-1.1 SWR and can talk about 3 miles. So that seems like a decent location.
 

persquank

Rank V
Launch Member

Enthusiast III

2,191
DFW
First Name
Randall
Last Name
Stephens
Member #

9377

hey all! so i have question, i have a cb antenna it’s about very little higher then my roof, i want to put it on my hood, my question is that going to work well or would i need a longer antenna?
I have a 2' CB antenna attached to a ditch light bracket above my fender. It is roughly the same height as my cars radio antenna which means it will fit in my garage. But I swap it out for a longer 4' one if I'm going on an adventure.

I only use the CB for running in a group, not trying to communicate beyond line of sight typically. Honestly, i probably would not have one these days if not for the weather channel.
If I'm highway driving, I'll leave the CB on scan mode just in case there's any chatter about traffic incidents.