Explorer I
For the past few years I have been running my ARB Fridge off a single battery in my Jeep. Normally we can go for about two days comfortably before the Jeep needs to be started to recharge the battery. With a new long trip in the planning stages I decided it was time to add some solar power to my rig.
The first step was to cut apart my roof rack and weld it back together. I wanted a flat roof rack and while Garvin's adjustable bars are nice, they take away from the space of the rack and leave large gapes between each crossbar. My "redesign" places all the bars on the roof completely flat and changes the spacing of each bar from 9 inches to 3.5 inches. Giving me a lot more support for items on the roof and a lot more tie down points. Finally, no more balancing fire wood on one bar hopping the ratchet straps stop it from falling through the cracks.
Unlike other vehicles, I have to be very space and weight conscious. Being that my vehicle is a Jeep TJ we just do not have a lot of spare space to give up. So, with that in mind I had to build the system as compact as possible. A custom mount was built to mount both the solar controller and the 800 Watt Inverter. The solar panel is spaced on top of the rack with latches and hinges so that my 4 gallon Rotopax can be mounted underneath it.
This does two things, one it saves valuable roof rack space. Two Rotopax do not seem to like direct sunlight. So by placing the panel over them (with space for the Rotopax to expand) the fuel can is kept out of direct sunlight and somewhat protected.
What are your thoughts on this setup? Do you think a 100 watt solar panel is enough to power something like an ARB fridge?
Check out the final installation:
The first step was to cut apart my roof rack and weld it back together. I wanted a flat roof rack and while Garvin's adjustable bars are nice, they take away from the space of the rack and leave large gapes between each crossbar. My "redesign" places all the bars on the roof completely flat and changes the spacing of each bar from 9 inches to 3.5 inches. Giving me a lot more support for items on the roof and a lot more tie down points. Finally, no more balancing fire wood on one bar hopping the ratchet straps stop it from falling through the cracks.
Unlike other vehicles, I have to be very space and weight conscious. Being that my vehicle is a Jeep TJ we just do not have a lot of spare space to give up. So, with that in mind I had to build the system as compact as possible. A custom mount was built to mount both the solar controller and the 800 Watt Inverter. The solar panel is spaced on top of the rack with latches and hinges so that my 4 gallon Rotopax can be mounted underneath it.
This does two things, one it saves valuable roof rack space. Two Rotopax do not seem to like direct sunlight. So by placing the panel over them (with space for the Rotopax to expand) the fuel can is kept out of direct sunlight and somewhat protected.
What are your thoughts on this setup? Do you think a 100 watt solar panel is enough to power something like an ARB fridge?
Check out the final installation: