Do you know what brand sliders you have? I'm intrested in those."Chimera"
Primary family vehicle. Designated off road vehicle. We try go on vacation 2 times a year and do our wheelin then.
Some local too, its just not favorable...
View attachment 6347
2016 SR5 4x4 T-Force Package
Barcelona Red Retallic
I am not sure if the T- Force package is applied at the dealership but I know that the lift was. dealership built truck with a 2 inch lift and a slightly oversized Tire I can't remember the size at the moment.
View attachment 6348
The T Force package comes with a roof rack and rock sliders with removable steps as well as a full complement of skid plates
For sure add-ons are the full replacement front bumper and my warn 9000i winch that is sitting in the garage.
View attachment 6350View attachment 6351View attachment 6352
4Runner Owners Registry
- Thread starter Lifestyle Overland
- Start date
2010 Trail/KDSS
BFG KO2s | 280/65R18
Bilstein coils/Toytec shocks
3" lift(?) — Bought it like this
American Racing wheels
The rest is stock
BFG KO2s | 280/65R18
Bilstein coils/Toytec shocks
3" lift(?) — Bought it like this
American Racing wheels
The rest is stock
Here's my list haha
1st. I had a 1990 SR5 V6 with the 5 speed and rear tire carrier. It was my first vehicle and I learned to drive with it.
2nd. My 99 Highlander package 4Runner. Sold it with about 240k miles. Original engine, rebuilt the trans once because my dad decided to drive it when the trans cooler fell apart and mixed with coolant hahaha it had about 220k miles when that happened.
3rd. My 1987 SR5 with the 22RE and 5 speed. I loved this truck and had to sell it because I couldnt afford the gas at the time. I still regret it. It had ball joint spacers up front, 63" Chevys out back, home made by me and a friend sliders, home made rear bumper and tire carrier, on 33" KM2's. I sold it with about 330k miles.
4th. My 1993 SR5 3.0 Auto. This was a VERY clean 2nd gen with only a little rust that I was planning on fixing but didnt haha. It had ball joint spacers, manual hubs, Land Cruiser springs, 33x10.50 KM2's and a rear locker.
1st. I had a 1990 SR5 V6 with the 5 speed and rear tire carrier. It was my first vehicle and I learned to drive with it.
2nd. My 99 Highlander package 4Runner. Sold it with about 240k miles. Original engine, rebuilt the trans once because my dad decided to drive it when the trans cooler fell apart and mixed with coolant hahaha it had about 220k miles when that happened.
3rd. My 1987 SR5 with the 22RE and 5 speed. I loved this truck and had to sell it because I couldnt afford the gas at the time. I still regret it. It had ball joint spacers up front, 63" Chevys out back, home made by me and a friend sliders, home made rear bumper and tire carrier, on 33" KM2's. I sold it with about 330k miles.
4th. My 1993 SR5 3.0 Auto. This was a VERY clean 2nd gen with only a little rust that I was planning on fixing but didnt haha. It had ball joint spacers, manual hubs, Land Cruiser springs, 33x10.50 KM2's and a rear locker.
Not at all. Pull the bumper skin, 6 bolts to the frame, 4 on the plate, two big u bolts around the aluminum bumper itself, minor plastic trimming, and volia.
Last edited by a moderator:
Awesome!
Did you do all that custom yourself or did you come across a kit of some kind?
Did you do all that custom yourself or did you come across a kit of some kind?
2003 Toyota 4Runner AWD V8
9/1/2016 111,000 miles
Shrockworks Sliders
275/70/17 Cooper Discover ATP
Central Oregon 4runner owner here. Nothing too special about the rig other than being one of the only clean, straight, sub-150k 22re's left on the road
2012 Trail Edition
No KDSS
3" OME suspension
Custom bumpers and sliders
8000lb Smittybilt winch
LED Interior lighting
HID LO's
LED HI's
285/70/17 Cooper STT Pro's
34x10.5x17 BFG AT KO2's
Camburg Ball-joint UCA's
BajaRack Utility
Rear-diff breather extended to under the hood
2-way Kenwood Radio
Rigid DOT/SAE Fog lights
Aurora 20" lightbar
No KDSS
3" OME suspension
Custom bumpers and sliders
8000lb Smittybilt winch
LED Interior lighting
HID LO's
LED HI's
285/70/17 Cooper STT Pro's
34x10.5x17 BFG AT KO2's
Camburg Ball-joint UCA's
BajaRack Utility
Rear-diff breather extended to under the hood
2-way Kenwood Radio
Rigid DOT/SAE Fog lights
Aurora 20" lightbar
Not a 4runner but I got a 2nd gen hilux surf, has had a 1uz-fe lexus v8 engine swap, amongst other mods ;-)
Last edited:
Enthusiast I
Here's my 2016 TRD Pro 4runner. No build thread, but I probably should start one.
98 sr5 4x4 v6, elocker. Winch, drawers, 3"lift, and a ton of maintenance.
I'm sure there is a group buy page, but this is really only relevant to 5th gen 4runner guys, so I'm going to put it here...
This is happening over on t4r.org right now. Interesting product for any 4runner guys running a winch
http://www.toyota-4runner.org/5th-gen-t4rs/225488-group-buy-cbi-winch-cutoff-switch-bracket.html
This is happening over on t4r.org right now. Interesting product for any 4runner guys running a winch
http://www.toyota-4runner.org/5th-gen-t4rs/225488-group-buy-cbi-winch-cutoff-switch-bracket.html
2014 Trail. Love this thing
Attachments
2015 Trail :)
It's a dream. Love it.
AugSep2016DSC_0244 by scottybell1313, on Flickr
AugSep2016DSC_0240 by scottybell1313, on Flickr
It's a dream. Love it.
AugSep2016DSC_0244 by scottybell1313, on FlickrAugSep2016DSC_0240 by scottybell1313, on Flickr
Pathfinder I
- 2,268
- First Name
- Ralph
- Last Name
- Peters
- Member #
-
0460
- Service Branch
- US Army
Day 1 to Now.
2001 with ~235,000 miles
Toytec 3" bilstien/eibach lift in front
Rough Country 3" in the rear
265/75/16 Cooper AT3
Home made front bumper (all scrap metal)
