4" lift Subaru Forester

  • HTML tutorial

HudsonZRoamer

Rank V
Launch Member

Pathfinder I

2,055
Washington, USA
First Name
Harley
Last Name
W
Member #

770

Anderson Deign and Fabrication does it again coming out with an amazing 4" lift for this model Subaru Forester. Tons of engineering went into this lift to put much less stress on the CV joints and make sure the geometry is tight as can be. This lift is not simply just adding spacers we had to do some major modifications. Im up in PacNW now and we did some trail runs to test the new hardware and permored as expected without any issues.

4inch

idols
 

TheMcCalls

Rank IV
Launch Member

Advocate II

1,095
Auburn, WA
Member #

2176

Anderson Deign and Fabrication does it again coming out with an amazing 4" lift for this model Subaru Forester. Tons of engineering went into this lift to put much less stress on the CV joints and make sure the geometry is tight as can be. This lift is not simply just adding spacers we had to do some major modifications. Im up in PacNW now and we did some trail runs to test the new hardware and permored as expected without any issues.

4inch

idols
Woah, nice work! That looks awseome!

How's the handling?

Where in the PacNW are ya? We're just south of Seattle. If you're way up here, hollar!
 
  • Like
Reactions: Kelly

wolf69

Rank II
Launch Member

Contributor I

490
Bargersville, IN
Member #

2233

Anderson Deign and Fabrication does it again coming out with an amazing 4" lift for this model Subaru Forester. Tons of engineering went into this lift to put much less stress on the CV joints and make sure the geometry is tight as can be. This lift is not simply just adding spacers we had to do some major modifications. Im up in PacNW now and we did some trail runs to test the new hardware and permored as expected without any issues.

4inch

idols
Looks Bad-azz. It's nice to see people thinking out side the box. Subaru makes one hell of a product but ground clearance was always an issue. Maybe they will see this and think about a factory spec release.
 
  • Like
Reactions: MazeVX

RaggedViking

Rank V
Launch Member

Advocate II

2,528
Readsboro, VT
Member #

2183

Anderson Deign and Fabrication does it again coming out with an amazing 4" lift for this model Subaru Forester. Tons of engineering went into this lift to put much less stress on the CV joints and make sure the geometry is tight as can be. This lift is not simply just adding spacers we had to do some major modifications. Im up in PacNW now and we did some trail runs to test the new hardware and permored as expected without any issues.

4inch

idols
This is awesome!
 
  • Like
Reactions: HudsonZRoamer

Wawa Skittletits

Local Expert East Region USA
Staff member
Launch Member
Member

Expedition Master I

5,079
Wilkes-Barre, PA, USA
First Name
Drew
Last Name
Hawley
Member #

1537

Ham/GMRS Callsign
WRBZ674
Service Branch
USN veteran
Despite the fact that you took the tallest OB Subaru crown it looks good Foz. I'm interested in seeing the clearances on the dirty side with such big spacers.

ground clearance was always an issue
Are you sure about that? There are 3 current models that come stock with 8.7" of clearance. Now... approach angle is a different story haha.
 

VCeXpedition

Rank V
Launch Member

Off-Road Ranger I

2,932
Pleasant View, UT, USA
First Name
Dan
Last Name
Rich
Member #

0582

Ham/GMRS Callsign
K6DHR
You can always tell that a guy (gal) likes his car if he turns around and looks at it for a minute as he walks away.

I bet you do that, don't you?

18 years owning my 80 and I still do that.
 
  • Like
Reactions: O.Dfj

MazeVX

Rank VI
Launch Member

Influencer II

3,278
Gießen Germany
First Name
Mathias
Last Name
Kreicker
Member #

8002

@FozRoamer are there some more information about the specs and what is changed?
Owned two subarus in the past, '92 legacy and '98 forester.