2011 Toyota RAV4 base 4WD build

  • HTML tutorial

Contributor I

IMG_1283.JPGIMG_0489.JPG


Modifications soo far are.

245/65/17 Wrangler trailmark A/T tires

Homemade snorkel

Homemade roof rack

1/4”aluminum framed skid plate with 1/16” Diamond plate skids transmission and motor

MTZ-34R 800CCA Battery from interstate batteries

Plans.

Home made rock sliders

Home made tube bumper front

Home made rear bumper

Hitch receiver

CB set up

Yellow fog lights

LED spot pods mounted to front of roof rack

Spacer lift or custom lift for 2+ inches

Transmission cooler

Fuel tank skid


I know anyone that looks at this post will say hey Diamond plate won’t skid or that ant thick enough. But it’s all I could get my hands on at the time and it’s better than plastic for protection.
 

Contributor I

57575438759__6F0A2324-17F4-46F4-A984-63AA1C7C21FA.JPGIMG_1710.JPGIMG_1809.JPG

Found a bumper from a 2000’s f-150 and cut it down to fit better. Mounted my propane 2 burner stove to rear door and have cut the muffler off and added a thrush turbo muffler. More plans to come. If you would like a more detailed and more frequent updates on my rig I’m over on instagram as redneckinarav4 .
 
  • Like
Reactions: Joey83 and Arailt

Contributor I

IMG_2287.JPGIMG_2276.JPGIMG_2273.JPGIMG_2193.JPG

I’ve recently added a 1.5” lift kit from northwoods performance. Also removers the rear passenger seat in place for a cooler.IMG_2333.JPG
I’ve also added a piece of 1/4” angle bolted to 1/2” angle in replacement of the rear crush bar. Don’t have photos.IMG_2156.JPGIMG_2135.JPG
 

Attachments