So this is the begining of this build. I stock form it is alright but things can be made better. First thing I did was installed was this ARB bumper. My buddy kinda freaked out when I started cutting the plastic.
'10 Nissan Frontier PROX4
- Thread starter wolf69
- Start date
From stock.....
to adding a 1.5" ready lift leveling kit and new struts..
actually went up 3.25" in the front and 2" in the rear. Now looking for tires....
to adding a 1.5" ready lift leveling kit and new struts.. actually went up 3.25" in the front and 2" in the rear. Now looking for tires....
With 3.25" lift you're going to be listening to a lot of coil bucket contact...
I'm right at 2.5" with the readylift and mine sings. Where did you pull another 3/4" from?
I'm right at 2.5" with the readylift and mine sings. Where did you pull another 3/4" from?
Traveler III
- 4,002
- First Name
- Kelly
- Last Name
- Herrin
- Member #
-
2032
- Ham/GMRS Callsign
- KFØDEX
My struts and springs were bad. I measured the before and after. Just did a trip to Detroit from Indy and at 70 mph on I75 in Michigan had no issues besides being a little light on the big pot holes. I also hit some trails there to flex it really good and it did better then I thought it would.With 3.25" lift you're going to be listening to a lot of coil bucket contact...
I'm right at 2.5" with the readylift and mine sings. Where did you pull another 3/4" from?
Went a little overboard with the aluminum.
Attachments
Enthusiast III
Looking good...love the build!
Nissan's definitely make a great base for a build up!! :)
Nissan's definitely make a great base for a build up!! :)
