Search results

Once we were happy with the bends it was time to weld them up to the bracket!

We then began bending the first leg of the bracket by the brake booster aiming to use two holes that are already in the engine bay keeping in mind the final placement of the box.

I then sand blasted the bracket for a fresh start!

Next we took a factory fuse box bracket out of our parts Cherokee and drilled out the rivets holding the two pieces together because we only need to part that latches onto the box.

So here is the power cable for the box.Took an old pair of jumper cables and cut them to the right size and crimped the ends on then used red heat shrink to bring it all together. One end has to be bent at 90 degrees to go onto the fuse box.

Started my next project on the jeep over the weekend. It is a factory fuse/ relay box that I will use for all of my auxiliary attachments such as various lights, fans, inverters, etc. My brother Jason Galbo did most of the rewiring of the Fuse box completely restarting from scratch. It now has...

Always hate taking the rig to a shop but as I don't have a welder of my own or the ability to weld I had to take it to a shop to get it welded. Notice my antenna putting a hole in their insulation after I told them I need to take it off and their reply was "It'll be fine". Also notice the amount...

Builds lookin good man! Certainly has come a long way already! I love those older style Cherokees. I'm eager to see how you utilize the space in the back for storage as I'm trying to figure out what I want to do with my four door 97 sport. If you'd like check out my build thread here...

Ohh I see. I don't have ABS luckily, but I am adding a second fuse/relay box for all of my auxiliary components such as lights and everything so I will not have much room either.. Sent from my iPhone using OB Talk

I will post pics of the new muffler when it gets warmer! Sounds pretty stock but a little more free flowing and deeper sounding. No drone at all on the highway. Now, can you fit dual batteries in the engine bay with that set up?

Ya it's mainly for the smoothness and slight mph gains due to better atomization Sent from my iPhone using OB Talk

Yes I have had them in for around 5 months or so. Biggest difference is how smooth it makes it start and run. I heard that they only make a difference if you help the engine breath alittle more (intake and exhaust) but I love them. As far as what brand they are, they are Bosch. Out of a Volvo...

I hope you enjoy the injectors. They should run really well with your exhaust and intake! Sent from my iPhone using OB Talk

Finally have some parts coming in preparing for a possible trip in late may around New England. First thing I needed to do was get a new muffler that not only flows better to go along with my 4-hole injectors and K&N air filter to get better gas mileage but also doesn't have holes in it like my...

Thanks man! Parts for other projects are starting to come in now. Once I get a few small things taken care of, I will be tackling the new steering box!! Ill call that guy from JCR when I go to order the brace!

Ok! I will give him a call when I'm ready for the swap. I need to replace my muffler and my oil pressure sending unit first (Tired of driving around with a gauge that reads whatever it wants lol sometimes nothing other times 20 and sometimes perfect!) . Then I'll have to carve out a weekend in...

Your welcome man! Well get the other side done. We just need to take he whole knuckle off Sent from my iPhone using OB Talk

Will do! I'll ask him about the spacer and how it works with a Durango box! Thanks again man Sent from my iPhone using OB Talk

Well my steering box has started clicking slightly. So looks like ill be doing a Durango box swap and new brace sooner than later... Do you or anyone have a possible part number for the correct Durango box? I believe I need the V8 (5.9L) 1999 NON snow plow package box. And yes I must use my...

Did everyone's favorite job the other day and rebuilt my drum brakes in the back due to my right rear wheel locking up randomly all the time and I'm far too lazy to do the disk brake conversion at the moment....maybe when its warmer...