Search results

bought all 4 lights for about $60 on amazon and they are super bright!

3/4 & 1/2' EMT conduit, approx $50 (including paint) and took about 4 maybe 5 hours..... finished dimensions 8x10 (10 feet long and comes 8 feet out away from the cruiser) used a 3/4' PVC pipe for cross memeber Arch support (i cut the ends off of two "T" fittings to serve as mounting points to...

i guess i should post these separate as different DIY projects :-)

lights i installed Sunday...$60 for all 4 on Amazon and they are super bright!!

awning folded up and stored

Awning project completed Friday...ended up being 10x8 covered area

Hidden mount winch project starting today!

those do look cool, i just dont have anywhere i could mount those on my rig unless i moved the tube to the topside of the roof rack, im reserving that space now for jerry can, jack, mud tracks and maybe a hi-lift. Solar panels are on the other side actually 2/3 of the rack.

As far as the pipe clamps. Mine is torqued down pretty tight. I don’t plan to do hi speed off road in rough terrain so I don’t anticipate it to slip or dislodge. My original design used the large HVAC zip straps but I quickly replaced those with the stainless clamps. It’s very strong and after...

Yep that was the reason I opted not to go that route. The screw cap top or fill port won’t be air tight unless you either use pipe dope or use Teflon tape or find the kind of fitting with a gasket. For me it wasn’t worth the effort to go that route plus I liked the streamlined look of the way I...

and as a side note, i weigh 225, i can get on top and stand on the platform without it flexing or hitting the roof, i was initially worried about that but i tested it out!. I took all the hinges off the ramps and drilled holes through the sides then used 1/4' bolts and nylon lock nuts to secure...

Yep you guessed. It. Had an extra set lying around. Lightweight and fit perfect between factory rails so I said why not!

4" PVC Sched 40, holds a little over 4 gallons, i used washing machine hot /cold valves for water in and water out, tire valve for pressurizing (30-35 PSI is all you need) dont fill the water up completely full so you will have some room to build air pressure for a longer run without...

Thank you! great information!!

looking for front and/or rear bumpers, condition (appearance) isnt important, structure/integrity is. Im in DFW area so within 3 or 4 hour drive is reasonable distance to travel to pickup. thanks!

I do have a third, a 2002 LX470 but my son is presently using it for his college vehicle......

Hello everyone from Dallas Texas area, new to the forum and to the way of life. I'm in the process of making a few modifications to my two 100 series vehicles, i have a 1999 Landcruiser and a 2000 LX470. Not 100% sure which one (yet) will ultimately end up being my primary rig. I look forward...