Search results

Have a fun guys, wish I wasn’t at work today [emoji1303][emoji1303]

Took off the rear bumper today, getting ready to sleeve the rear frame rails so I can remove the stock tow hitch and add in my old hide a hitch at the same depth but in between the rails raising it up almost 7 inches for more rear clearance this way I’m not dragging the swing out tire carrier...

Welcome, Drivetrain and safety were my 1st things made sure engine, trans and brakes were in order then added a very reliable jack, spare tire carrier and wheel and tire to match what was on the Yukon when I got it ( hence the reason I haven’t done a larger lift) use up these tires 1st then a...

I don’t think I added much when you think about what I removed center and 3rd row seats, seat belts and interior trim in the rear. Total weight of wood, carpet and screws maybe 250/300lbs should be close to even.. when I have a chance I’ll be weighing the seats to see what came out

LOL I resemble that remark [emoji15][emoji15] my Yukon xl is setup with a storage / sleep platform inside and I use a ground tent, I wanted a RTT but decided there would be times I want to roam and not have to brake down camp just to go on a trail and return

Welcome [emoji1303]

I wish I could but I’m working Saturday’s again this September and October so I won’t be back out till December unless it’s to go out on the trail then I may cough cough LOL. Want to make up something for my Yukon

I posted a update with photos in the build section k9 screen update [emoji1303]

Thanks. That’s a good looking pair you have [emoji1303]

Hey Guys and Gals, So some of you showed some interest in my side window screens. to keep my dogs from jumping out since they are now just 6 inches or so from the base of the window since I built my sleeping / storage platform. materials 2 sheets 24x30 black mesh 18ga screen 16 1/8 x 1...

What truck ?

Ya my reply ended up in my post LOL it’s all good thanks for getting back to me [emoji1303] gonna check those out

I wish I had taken a closer look at your setup that day as for the mounting of the main bar [emoji1303]

That’s the million dollar question lol, they were press fitted and staying in but need to secure them in place, at this moment I’m going to use some washers to over lap and screw to the door frame, I’d really like to make a trim panel may weld up something at work once I see how this functions

It’s a 18ga mesh from OSH 24x30 this one is coated in a light black coating & doesn’t have sharp edges on the either face much safer for the my pups noses, I used a cutting wheel, instead of sheers that had caused the coating to come off so I just touched it up with rattle can black lol may...

what series case did you go with ?

Started making some k9 screens for the rear windows..

That’s what I need it’s been way to long since I’ve been out [emoji1303][emoji1303]

I wish I could make sept but back to working Saturdays till November .

Oh some of us know how most of those two buck Chuck stories begin, it’s the ending that will get ya every time LOL. Welcome [emoji1303][emoji1303]