Enthusiast III
I installed my Redarc in the 12V location and now need a 12V plug for new electronic item. Where have you installed your Redarc in your Jeep? Please let me know the Pros and Cons for your choice. Thanks in advance for replying.
Where to install Redarc Brake Controller in Jeep Gladiator
- Thread starter Gstrange
- Start date
Enthusiast III
My Redarc Elite is double sided tape plus zip tied under the driver side dash. There is a nice flat spot in the dash support structure where the module can be mounted solidly (which is critical for this controller )
The control head is to the driver-side of the Aux Switched on a 3d printed panel with a couple RJ45 jack for radio mics.
The the 3D panel came from this guy. JAGarageDesigns - Etsy I had to trim and sand a bit.
This is the third time I’ve used this controller in a build, and I still think it’s the best available for overland towing.
The control head is to the driver-side of the Aux Switched on a 3d printed panel with a couple RJ45 jack for radio mics.
The the 3D panel came from this guy. JAGarageDesigns - Etsy I had to trim and sand a bit.
This is the third time I’ve used this controller in a build, and I still think it’s the best available for overland towing.
Attachments
Last edited:
Enthusiast III
First of all, thanks for your input, and I do agree that is a great location, but my Mojave has that panel already occupied. If you or anyone else has another placement idea. Please share.
I have been pondering if the control unit would fit under the grab handle? It would be out of the way and safe from being hit accidentally.
What are your thoughts?
Enthusiast III
Enthusiast III
Now that's interesting. I'll have to take a longer look at that possibility. Thanks for sharing
