What Did You Do With Your Rig Today?

[scubasteve2002]

Drew up a breather manifold a few weeks ago. I finally had time today to take the drawing and turn it into real life. It's made of aluminum with 4 through holes. This allows up to 4 connections ( front diff, rear diff, transfer case, and transmission) All holes are tapped 1/4" 18NPT. Just order the fittings today. Can't wait to finish it!

An update on my breather manifold. I got the fittings in. Now I just have to wait for a weekend to install.

 

[maktruk]

Mounted Hella dual purpose driving/fog lights. I will of course be running 12ga wiring and a 40 amp relay and will wire all 4 bulbs to run at once :-) Ran out of daylight.

I have a light bar for the upper tab mounts but it's too big. I'm thinking shovel mounts for the murderspork...

 

[Sudingusnavy]

Horns went out so I made a bracket and installed these today. Plan on going with some PIAA horns in the future but these were a quick fix. I will say they are WAY louder then my stock ones.

 

[Billy "Poserlander" Badly]

Removed the OEM steps to prep for the Hefty Fab sliders, which I hope to install Friday, if the weather cooperates. Also de-badged the "TERRA" from the rear gate. Kept the "X" for now, I have nebulous plans for it...

 

[maktruk]

Horns went out so I made a bracket and installed these today. Plan on going with some PIAA horns in the future but these were a quick fix. I will say they are WAY louder then my stock ones.

Is it bad that I knew it was a Nissan 4.0 just from the Tapatalk thread preview pic?

 

[Sudingusnavy]

Is it bad that I knew it was a Nissan 4.0 just from the Tapatalk thread preview pic?

Lol! No it's easy to tell.

 

[Mad Garden Gnome]

Finished up the welding on the bumper project.

Now to start the swing arm portion.

Took it to pick up Thai food.

 

[TheBarefootFamily]

Well I did some much needed repairs after the last cold snap, lost an alternator and belt in the bush luckily was on our way home so I just kept going and didn't stop until we got home, sadly 10 days for parts and another for install and maintenance work, thanks Micheal for the battery box clean up idea it was to cold to wash him as well. Finally found a 70A alternator and added to dual battery switch.

 

[scubasteve2002]

Had to renew my plates. So I upgraded to Smokey The Bear plates. Some of the cost goes to Ohio Division of Forestry. "Only You Can Prevent Wildfires!"

 

[Billy "Poserlander" Badly]

Had to renew my plates. So I upgraded to Smokey The Bear plates. Some of the cost goes to Ohio Division of Forestry. "Only You Can Prevent Wildfires!"

I worked on a 500 gallon engine for the Oregon Dept. of Forestry one summer, and I had to wear the Smokey costume for parades and festivals, since I was the FNG. It was HOT!

 

[scubasteve2002]

I worked on a 500 gallon engine for the Oregon Dept. of Forestry one summer, and I had to wear the Smokey costume for parades and festivals, since I was the FNG. It was HOT!

Wow!! How was that job? And Hahahaha got to love being the FNG! Get volentold to do a lot [emoji23]

 

[Billy "Poserlander" Badly]

Wow!! How was that job? And Hahahaha got to love being the FNG! Get volentold to do a lot [emoji23]

Great job, loved it, and I actually enjoyed being Smokey despite the heat...

 

[timberwolf_120]

Kratos has landed!!!
(Hkoffroad.com)

 

[ravenplague]

Tried to clean out my Landcruiser from a recent Death Valley trip but had to take my new KLR out for a spin instead!

 

[Explore Maine]

View attachment 11178 Tried to clean out my Landcruiser from a recent Death Valley trip but had to take my new KLR out for a spin instead!

how did you mount the light by the plate? I'm looking do something like that.

 

[Billy "Poserlander" Badly]

Too rainy and wet today to install my sliders, so instead I removed my front Nissan emblem with the thought that I'd black it out. But, I managed to snap 2 of the tabs in the process (I ALWAYS break the plastic tabs!), so that motivated me to monkey with alternatives. Here's a prototype of a flat black cover for the emblem mounting holes w/ the OB badge in the center. I'm thinking I might go this route, and add some adhesive vehicle letters at the points of the compass... N, S, E, W. We'll see... (I also ordered a replacement Nissan emblem in case it doesn't work out):

 

[1Louder]

Installed my birthday present with help from Gunnermoose.

 

[pdxplorer15]

An update on my breather manifold. I got the fittings in. Now I just have to wait for a weekend to install.

Nicely done! I love that you put your O.B. # on the manifold.

 

[Sudingusnavy]

Got tired of my exhaust being turned down out of the muffler and being honed out on all the long road trips, so I got this new piece of the exhaust put on. It sounds a lot better.

 

[scubasteve2002]

Nicely done! I love that you put your O.B. # on the manifold.

Thanks buddy!! Wanted to make it a personal piece haha