Spencerr
Rank IV
Enthusiast II
Installed my home made fridge box and slide
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
Member II
- 889
- First Name
- Pete
- Last Name
- Meuser
- Member #
-
20275
- Ham/GMRS Callsign
- GMRS WREL270
Just camped at a friend's place on Wolfpit at the base of Shortoff this weekend..How bout that wind Friday and Saturday?
Today I started replacing my front upper and lower uni-balls and heim joints. The truck got put on the back burner for a while but now I finally made time to get it started and refreshed.
Got the tires off the front and then a neighbor started up a conversation and I ran out of daylight.
Tomorrow I continue the tear down.
Got the tires off the front and then a neighbor started up a conversation and I ran out of daylight.
Tomorrow I continue the tear down.
Attachments
Member II
- 889
- First Name
- Pete
- Last Name
- Meuser
- Member #
-
20275
- Ham/GMRS Callsign
- GMRS WREL270
ptgarcia
Rank III
Enthusiast III
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
-
17011
- Ham/GMRS Callsign
- KN6JJS
My rig had a very annoying squealing noise coming from the fan belt area. Watched some YouTube videos for a fix and picked up a bottle of 303 Protectant from Amazon. Sprayed it on the underside of belt and around pully's and bamm no more sound. I am so happy that I can hear the normal engine sound.
Member II
(Sunday) Led a group of 28 people through some N. GA roads!
Attachments
Member II
- 889
- First Name
- Pete
- Last Name
- Meuser
- Member #
-
20275
- Ham/GMRS Callsign
- GMRS WREL270
Off-Road Ranger I
- 1,451
- First Name
- Allen
- Last Name
- Murray
- Member #
-
27152
- Ham/GMRS Callsign
- WRJY639
Today the XJ got some rocker protection. I had planned to build a set but found these too cheap to justify the expense and time it would take to weld up my own.
Boostpowered
Rank VI
Member III
Put on the aev rear bumper yesterday.
Wore me out getting it on.
Wore me out getting it on.
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
-
17011
- Ham/GMRS Callsign
- KN6JJS
Boostpowered
Rank VI
Member III
Thanks it saves me the trouble of fabbing up rear bed sliders. next up wil be drilling the frame for the sliders i built and putting them on. It should be nearly complete after that, just need a trans skid though I may have to make one myself haven't found anything I really like yet.
Enthusiast III
I've been doing a lot of wheeling lately. I just got back from a 2800 mile trip, half was off road so I had to do some maintenance. I replaced my coil packs, wires, spark plugs, fuel injectors, PCV valve, intake gaskets, throttle body gasket, air filter, cleaned the throttle body, did an oil change and cleaned up the engine bay.
Attachments
Enthusiast III
Rachel and I hit a local trail here in Va for a couple of hours. Before we headed out, we threw an additional cross bar on our Sherpa rack to provide a better base for the Max Trax mount. The mount seems way more solid now, super happy with that little upgrade. We were getting some wiggle with it mounted to a single cross bar at highway speeds.
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
-
17011
- Ham/GMRS Callsign
- KN6JJS
Enthusiast III
Got around to working a little more on freshening up the suspension on the raptor.
Passenger side pretty much finished up with the drivers side next. Kind of a before and after
Passenger side pretty much finished up with the drivers side next. Kind of a before and after
Attachments
Explorer I
Low key weekend working around the house and resting after a trying week. Took the truck out Friday to pick up my wife after she was in an accident on the freeway. She walked away unscathed but her car not so much. It was towed home and we will have to see what the insurance company says. Good news is that she is ok and looking at new Broncos as a possible replacement.
