What Did You Do With Your Rig Today?

[SomeGuyNamedPaul]

Welded a different mounting bracket to my roof rack for a lower profile.
Before:
View attachment 88863
After:
View attachment 88864

While I was at it, I painted the roof ribs with truck bed liner just in case the weight on the rack is enough to flex the basket.
View attachment 88866View attachment 88867View attachment 88868

 

[A-Aron]

Finished the front half of my custom center console and got all my lights wired to the new switch panel.. look for an update in the next day or two.of my rig build thread.View attachment 88894View attachment 88895View attachment 88896

 

[Daryl 32]

We have been working on some bed storage drawers for our 99 short bed F250, they are not done yet but getting much closer.

The design intent is for us to be able to sit up in the shell and be able to our feet on the floor in the middle. The two folding center fill pieces are hinged on the bottom and when opened the wood stop the fold when they are flat across.

Drawers are 54" deep with a third center section for storage at the front of the bed with a flip open top.

View attachment 88906

View attachment 88908

View attachment 88910

View attachment 88911

View attachment 88912

View attachment 88913

View attachment 88914

View attachment 88915

View attachment 88916

View attachment 88917

 

[JCWages]

Nothing major, just changed a burned out headlamp. But successfully found my 10mm socket and finished up with a 10mm in my toolbox.

That's always a big win!

 

[Boort]

Drove out to the storage lot to check on the popup after all of the snow and wind we've been having here in CO. So far things are looking good, cover is still in place and doing it's job.
other than that took Dad and the dog out for a 5k talking about summer plans and brainstorming on places to go.

Boort

 

[roots66]

But successfully found my 10mm socket and finished up with a 10mm in my toolbox.

Nice. I'm still looking for my 15mm.

 

[Gabriel Bozeman]

Finished the front half of my custom center console and got all my lights wired to the new switch panel.. look for an update in the next day or two.of my rig build thread.View attachment 88894View attachment 88895View attachment 88896

Very nice! I might be doing something if the short here soon as well! Great job.

 

[HappyOurOverlanding]

Drove out to Sand Mountain to see what it's all about.View attachment 88983View attachment 88985View attachment 88986

 

[roots66]

Increased my rigs capability.

 

[hidesertwheelin]

I built a small storage unit in the back of my friends Xterra to hold Frontrunner Wolfpack boxes.

 

[HawkH3Alpha]

Mounted my RTT and figured out position and spacing in front of rack. View attachment 89085View attachment 89086View attachment 89087

 

[Cpol]

View attachment 89100
Getting wired with switch panel for all accessories.

 

[CR-Venturer]

Drove out to Sand Mountain to see what it's all about.View attachment 88983View attachment 88985View attachment 88986

Looks like it's all about awesome dune driving!

 

[HappyOurOverlanding]

Looks like it's all about awesome dune driving!

For the folks with ATVs. Didn't actually attempt it in the rig. [emoji53]

 

[HappyOurOverlanding]

View attachment 89100
Getting wired with switch panel for all accessories.

Like blue sea. I used the same in my rig.

 

[CR-Venturer]

For the folks with ATVs. Didn't actually attempt it in the rig. [emoji53]

Gotta drop them tire pressures and send it, brother! :D

 

[Ldstruckn]

Mounted my RTT and figured out position and spacing in front of rack. View attachment 89085View attachment 89086View attachment 89087

Mine is still sitting on the garage floor. We have a blizzard coming in tonight so it will continue to sit there for a while. Glad to see it fits on the H3. I was worried it might not on my xterra but it is about the same size as your HummerView attachment 89154

 

[Ldstruckn]

Drove out to the storage lot to check on the popup after all of the snow and wind we've been having here in CO. So far things are looking good, cover is still in place and doing it's job.
other than that took Dad and the dog out for a 5k talking about summer plans and brainstorming on places to go.

Boort

you can come up to Cheyenne tomorrow and help dig out my rig so I can get to work

 

[Boort]

you can come up to Cheyenne tomorrow and help dig out my rig so I can get to work

Sure thing. Weather apps are saying we are slated for another round of 65MPH winds, and 8 to 16 inches of snow in the next 36 hours. I'm told that CDOT has already turned on the blizzard warning signs down in Denver. Can't imagine the kinda winds you're in for up there in Cheyenne.

Just strap that RTT box on to the front bumper like a snow plow :D

Boort

 

[Ldstruckn]

I am sure the 60-90 mph wind will keep the radiator cooling while the cardboard pushes the pow; or act as an airfoil and help me achieve flight.