Traveler III
We don’t get snow very often in the DC area and I love it when we do!
View attachment 81961
View attachment 81962
View attachment 81961
View attachment 81962
What Did You Do With Your Rig Today?
- Thread starter iamout
- Start date
I seen the footprints beside the vehicle and thought “ oh some is stuck walking for help” then I realized that they were yours
World Traveler III
View attachment 81972 View attachment 81971 View attachment 81970
What people do for an amazing shot
What people do for an amazing shot
Replaced the old drums with disc brakes. Kit from lugnut 4x4. Required a little clearancing for it to work but it bolted right up. Replaced bearings and seals while I was in there.View attachment 81978View attachment 81979
Educator I
- 10,890
- First Name
- Jim
- Last Name
- Bro
- Member #
-
12989
- Service Branch
- USAF DAV
Completed the GMRS install...Pic 1&2 show the mount (With cap on) on my rack. Pic3 is where I went thru seam and Pic4 shows radio mounted to tranny well next to my S&W holster.View attachment 82017 View attachment 82018 View attachment 82019 View attachment 82020
Member III
Here are a few more pics of mu coastal offroad bumper build. The bumper comes flat in a box.
After the stock bumper is gone, the mounting plate gets bolted on the stock location
View attachment 82036
Next is the 2 side plates in factory holes. Bolt to the frame then tack.
View attachment 82037
The winch mount plate goes inand rests on a nice spot. No winch yet. Maybe later. Then the front plate. Fog lights ready. I had a set and he custom cut the holez my size.
View attachment 82038
The front fairlead piece. The mid part is done.
View attachment 82039
The wings are 4 or 5 pieces each. One side done.
View attachment 82040
And the other side.
View attachment 82041
That is as far as i got this day. Shell of the old bumper put back on with a few clips and a prayer until next time.
There is a front plate that goes on after some beads are layed. Then more beads and grinding and flapping.
More updates as the progress progresses.
After the stock bumper is gone, the mounting plate gets bolted on the stock location
View attachment 82036
Next is the 2 side plates in factory holes. Bolt to the frame then tack.
View attachment 82037
The winch mount plate goes inand rests on a nice spot. No winch yet. Maybe later. Then the front plate. Fog lights ready. I had a set and he custom cut the holez my size.
View attachment 82038
The front fairlead piece. The mid part is done.
View attachment 82039
The wings are 4 or 5 pieces each. One side done.
View attachment 82040
And the other side.
View attachment 82041
That is as far as i got this day. Shell of the old bumper put back on with a few clips and a prayer until next time.
There is a front plate that goes on after some beads are layed. Then more beads and grinding and flapping.
More updates as the progress progresses.
Advocate II
Thank you for the pics! This gives me a better idea of the process.
Finally got better tires, they were a bit rough to mount and balance.
Traveler I
My Crew and I got the chance to spend the weekend in the Mountains of NC Running some logging trails that one of our buddies owns and FS roads on the back country. Great Dude Trip. Tbones, Cold Beer, Jeeps, and best Bros....
Off-Road Ranger I
Finished up my sliders.. hoping to paint and attach tonight..View attachment 82093
Member III
They look solid!! [emoji106]
Hardwired in my 1000w inverter. Mounted it under the front passenger seat, for now. I'm going to move it to the cargo area eventually but I'm still trying to figure out how i want to lay everything out first.
Installed the Prinsu non-drill rack and Heretic light bar.
And blinded my wife in the garage [emoji51] View attachment 82165View attachment 82166
And blinded my wife in the garage [emoji51] View attachment 82165View attachment 82166
Off-Road Ranger I
Got em painted and installed!! #rocksliders #bodyarmorView attachment 82179View attachment 82180
Advocate II
Contributor III
View attachment 82204View attachment 82205
I put new wheels and tires last week,installed my skid plates,rock lights and spod. View attachment 82206
I put new wheels and tires last week,installed my skid plates,rock lights and spod. View attachment 82206
Expedition Master I
- 11,455
- First Name
- Michael
- Last Name
- Lee
- Member #
-
13728
- Ham/GMRS Callsign
- KM6YKV
- Service Branch
- Army & Marine Corps
Took it to Hurricane, Utah for the 2019 Winter 4X4 Jamboree! Got to help @overlandbound set the booth, very nice to finally meet Michael!
View attachment 82237View attachment 82238
View attachment 82237View attachment 82238
Off-Road Ranger I
Awesome! I'll see you guys tomorrow!
Expedition Master I
- 11,455
- First Name
- Michael
- Last Name
- Lee
- Member #
-
13728
- Ham/GMRS Callsign
- KM6YKV
- Service Branch
- Army & Marine Corps
