At this point I could put on a clinic on "stripping the interior of an access cab Tacoma"
I drilled holes in the roof to mount antennas,
I removed two previous antennas, and installed three replacements.
Re-wired, and cut to length all of my coax.
Cleaned up power wiring under the center console
Installed a 110v and 12v outlet in the back of the truck for my daughter
(I'm sure there's more)
Three antennas on the roof, plus a GPS now.
Coax and GPS cables enter the truck, MFJ box is a Duplexer and splits 2m and 70cm to the appropriate antennas
Moved the APRS transmitter back to where I can access it.
Power distribution under the center console for all the radios, and the rear 12v accessory.
The 12awg red and black there are 110v from the factory inverter (which is at the very bottom of the picture with the white connector
Cleaned up the wiring to my dual band antenna. Routed the cables under the carpeting (Power is too, it just comes out from the front.