Here she is...I bought her back in Feb. 1986 Dodge Ramcharger..318 4 speed manual. It had been someone's hunting buggy.The Old Goat
- Thread starter caleath
- Start date
Here she is...I bought her back in Feb. 1986 Dodge Ramcharger..318 4 speed manual. It had been someone's hunting buggy.
Here is the photo thats my inspiration. This is an older model but you get the idea. 
Here she is today...I have a 12 000 pound winch to put on the front, I will be getting the metal this week. I will use her for most things...not a dd as I have a few others I can drive. 
Plans include 4 inch lift...moving to 16 inch wheels...not sure what tire size just yet. I am in the process of adding a 2nd battery and all the wiring associated with it. Over head console for cb and the Ham radio I need to get my crap together and get my license for. Spare tire rack for the rear and a roof rack. Who knows from there..I will add some more pictures as I move along....thanks for watching.
So far I have repaired a bunch of sketchy wiring, replaced all of the weather striping, started on the add on electrical...
Influencer II
Off-Road Ranger I
- 2,876
- First Name
- Todd
- Last Name
- Hoffmaster
- Member #
-
4284
- Ham/GMRS Callsign
- KJ7CRJ
- Service Branch
- Air Force
Worked on my wiring etc today....got my relays in and have been soldering and crimping....
I guess no one is interested in an old Dodge build?
My plans are to use for hunting and getting around...I want to do some more canoeing and general out doors stuff.
I have always wanted to get into storm spotting...ham thing...we have tons of bad weather in this area.
As I approach 50 my knees dont handle the running hiking thing so much anymore.
I guess no one is interested in an old Dodge build?
My plans are to use for hunting and getting around...I want to do some more canoeing and general out doors stuff.
I have always wanted to get into storm spotting...ham thing...we have tons of bad weather in this area.
As I approach 50 my knees dont handle the running hiking thing so much anymore.
Influencer II
Need more pictures.. I still one day hope to own a ramcharger.. Looks good!!
Sent from my LG-H810 using OB Talk mobile app
Sent from my LG-H810 using OB Talk mobile app
Beautiful rig. Where did you find one still alive? We had one when I was in highschool for about a year. The rear end rusted fell off and the brakes rotted. My dad had to drop the plow to stop it when going down the driveway. Sad day. I hoped to have it as my first car.
Can't wait to see where the build goes. A storm rig would be cool!
Can't wait to see where the build goes. A storm rig would be cool!
Love It! I was in Pa Tuesday saw one heading up 81, thought to myself gawd I wish they still made stuff with style like that!
Sorry I missed some of the responses. Thanks for those that are interested. These trucks are not common at all here. I cant believe I found one either. The thing isnt pretty but its 99 % rust free.
Update. I worked on the winch bumper this weekend...its not finish welded yet...having to make sure nothing interferes with anything else ya know. I will be adding a brush guard and one more receiver hitch mount to the front .
Update. I worked on the winch bumper this weekend...its not finish welded yet...having to make sure nothing interferes with anything else ya know. I will be adding a brush guard and one more receiver hitch mount to the front .
Never can have too many clamps...I have way more than these...I was a mechanic and welder for a few years. My eyesight ...which used to be perfect ..sure causes me issues welding now...looking over bi focals in a helmet is a pain in the butt.
Now it will be rear bumper time..I want to move the spare out of the back of the truck. Well you cant go down and buy bumpers and tire carriers for these old trucks. I will need a pivot for the tire carrier,,I have looked up the kits for making them....and well I am a cheap skate. I went over to my scrap pile looking for inspiration . I found the rear hub I replaced on the wife's Toyota van. Bearing just had a hum so I figure it will be good for what I need.
dang thats a big pictutre....
So I am going to weld a piece of pipe from the hub ...the cross member will come off that upright. I will replace that pin with a longer one so it will latch when closed and open.
So I am going to weld a piece of pipe from the hub ...the cross member will come off that upright. I will replace that pin with a longer one so it will latch when closed and open.
Member III
I'm with you man! (Cheap skate) My rear bumper started out as a 8' piece of 4"x8" rectangular tubing.
I just scooped up a free rusty old jeep bumper with all the swing out hardware and plan on cutting and welding and making it work on my tubing bumper.
Also I grabbed a rear bumper that I'm gonna mod to work upfront. It's size and shape was close enough to fitting that it makes sense to use instead of scratch building another one. I'll include some pictures as I get into it.
I dig the old iron! It's cool to see them on the road and on here.
Rock on!
Rustyburbin from SoCal 5 kids, wife, dog and a 1970 K20 Suburban
Rusty we might be related.....anyone can go down and buy stuff and put it one....making it...thats where I get to have fun. ...I really dig your ride too.....I want a jeep wagoneer so I can have a big 4 door rig.I'm with you man! (Cheap skate) My rear bumper started out as a 8' piece of 4"x8" rectangular tubing.
I just scooped up a free rusty old jeep bumper with all the swing out hardware and plan on cutting and welding and making it work on my tubing bumper.
Also I grabbed a rear bumper that I'm gonna mod to work upfront. It's size and shape was close enough to fitting that it makes sense to use instead of scratch building another one. I'll include some pictures as I get into it.
I dig the old iron! It's cool to see them on the road and on here.
Rock on!
Rustyburbin from SoCal 5 kids, wife, dog and a 1970 K20 Suburban
