The @nomorebaddays 2nd Gen Xterra

[Lanlubber In Remembrance]

Couldn’t sleep last night so I decided to brave the 20 degree temps and do the rears. Cutting the bumper did not go as smoothly as I had hoped and I spent most of the time drilling holes around the outline since the Dremel was taking an eternity (Probably didn’t help that I couldn’t feel my fingers though).

Good job Sam, don't know how you did it in the cold ! I hate sleepless nights.

 

[Buster4pres]

Managed to convince a friend to use one of his vacation days to go out and do one of the various routes we’ve found in Southern OH. Only got about half of it done but we had an absolute blast (though it was muddier than we anticipated) View attachment 132491View attachment 132492View attachment 132493View attachment 132494View attachment 132495
View attachment 132496
My rock sliders have a solid half inch of mud on them. Washing the X tomorrow is going to be a blast [emoji849]

 

[Munga Brown]

Love your build!

 

[Buster4pres]

Love your build!

Thanks! It’s been fun!

View attachment 132907
View attachment 132909
View attachment 132908

Got my last Christmas present in the mail today so I went ahead and threw them on. There wasn’t any definitive proof if these mounts worked with the hood strut mod, but they do for the most part so I’m very pleased

 

[zanethan]

Thanks! It’s been fun!

View attachment 132907
View attachment 132909
View attachment 132908

Got my last Christmas present in the mail today so I went ahead and threw them on. There wasn’t any definitive proof if these mounts worked with the hood strut mod, but they do for the most part so I’m very pleased

What mounts are those?

 

[Buster4pres]

What mounts are those?

They’re Rago mounts. Kind of a pain to install honestly but I like the placement of them vs others

 

[Lanlubber In Remembrance]

They’re Rago mounts. Kind of a pain to install honestly but I like the placement of them vs others

Did you have to remove the cowl below the wind shield ?

 

[Buster4pres]

Did you have to remove the cowl below the wind shield ?

No, I got to leave that in place thankfully. I had to unbolt the top of fenders and pull them away so I could get to the bolts for the hood mount and these bolted on top. Only took about an hour but doing it in the cold was annoying

 

[Lanlubber In Remembrance]

No, I got to leave that in place thankfully. I had to unbolt the top of fenders and pull them away so I could get to the bolts for the hood mount and these bolted on top. Only took about an hour but doing it in the cold was annoying

I like the mounts and think I can make something similar for my LRD2 if I can't buy them somewhere.

 

[Buster4pres]

I got a little curious tonight and decided to get a baseline for my lights since I plan of working on upgrading them in the future (HID retrofit and led roof lights). Honestly I was a little surprised at how useless some were.

Low beams
View attachment 133238

Lows w/ fogs
View attachment 133239

Lows w/ fogs & ditch
View attachment 133240

High beams
View attachment 133241

Highs w/ roof lights
View attachment 133242

Highs w/ roof & ditch
View attachment 133243

Definitely less than impressed with my roof lights, so much so that it’ll probably be one of the next things I address.

And a shot of the X for good measure
View attachment 133244

 

[Vadim]

Great job on your build so far!!! One company to consider for a winch bumper is Coastal Offroad. They have DIY weld yourself kits and mine came out to about $650 shipped with a skid plate (for my '14 Frontier). I got my used Lincoln Electric MIG welder off craiglist for $300. Spent time practicing my welds on scrap steel (free on craigslist) till they looked and felt solid. The bumper kit comes with great instructions and is fairly simple to put together. Still ended up costing me less then buying any other winch bumper online. I also used rattle can bedliner paint and its been about a year with plenty of offroad time pulling myself and other vehicles out and everything has held up solidly.

This way you get to learn a new skill if you don't have it already and you get a welder in the process.

 

[Vadim]

My '14 Frontier was an east coast vehicle and at 55k miles, my upper controls arms came out easily but I had to cut and grind my lowers out cause they were rusted shut. I feel your pain with that process.

 

[Buster4pres]

Been really bored as of late so I decided to build a few parts based on things I had seen on the forums and Facebook groups.

I originally said I wasn’t going to put a bunch of lights all over this thing but I figured some rear ditch lights wouldn’t be a bad thing to have. The bumper lights provide good light when backing up but since they’re so low they cover a lot of ground. My goal was to have enough clearance so that it didn’t cause any clearance issues with my RTT and it’s actually sits lower than I thought it would.
View attachment 137458
This was the one I saw on FB but since I’m not a fan of light bars I chose pods.
View attachment 137460

Also, I haven’t been able to decide what direction I want to take my drawer system and since I decided to put off buying a fridge for a little bit longer it wasn’t a real pressing issue. I managed to find a thread about using a Harbor Freight hitch carrier as a rear storage rack and figured it would make an adequate option for the time being. Overall I’m quite happy with it though.
View attachment 137462
And it gives me the option to use the storage tub in the floor to put some of my recovery gear
View attachment 137463
*recovery gear not found (still in my backpack[emoji23])

 

[Buster4pres]

Well, my luck sucks.

 

[Lanlubber In Remembrance]

Well, my luck sucks.

Did it happen while sitting in the street ? Terrible luck in deed ! Insured I hope .

 

[Buster4pres]

Did it happen while sitting in the street ? Terrible luck in deed ! Insured I hope .

Yeah. A drunk driver hit it while it was parked.

 

[TerryD]

Saw that on IG man. That REALLY sucks.

 

[jason_oc]

Great job on the rig! It looks awesome!

 

[Lanlubber In Remembrance]

Yeah. A drunk driver hit it while it was parked.

I always had a fear of parking in the street especially if it was a through traffic street. Back in 1950 I lost my 1938 Ford coupe because a woman had her baby in the front seat of her car (no child seat laws then) laying down, the baby rolled over and fell to the floor. She grabbed for the baby and her car swerved into my street parked car. She tore the whole left side off my car. She Didn't call the police and never paid me for my car. I was just 15 and didn't know how to get her to pay me.

 

[Buster4pres]

Saw that on IG man. That REALLY sucks.

Yeah, it’s less than ideal. Found its replacement though if it does get totaled out.

I always had a fear of parking in the street especially if it was a through traffic street. Back in 1950 I lost my 1938 Ford coupe because a woman had her baby in the front seat of her car (no child seat laws then) laying down, the baby rolled over and fell to the floor. She grabbed for the baby and her car swerved into my street parked car. She tore the whole left side off my car. She Didn't call the police and never paid me for my car. I was just 15 and didn't know how to get her to pay me.

I’ve lived here for three years and for the first two years there were no issues. But now two cars have been totaled out front