Show me your drawer systems!

  • HTML tutorial
reaver

reaver

Rank VI
Member

Explorer I

3,680
Caldwell, ID, USA
First Name
Brian
Last Name
McGahuey
Member #

23711

Ham/GMRS Callsign
GMRS WRMV941
In all seriousness though, I recently build a new drawer system for the back of my x. I still have to paint it (I don't have a garage, and it's too cold right now for paint).

I still need to get my gear in it, but here's the finished product.





All the electrical for my auxiliary electronics is hidden unter the top and up against the back of the seats. There's also an inverter and a water pump under there. There's a faucet on the passenger side, tucked up against the rear passenger side speaker. I have a 10 gal water tank that ended up being a bit too big, so right now, I'm trying to figure out what my options would be.
 
  • Like
Reactions: NiteSky and EXPO_D1
madcratebuilder

madcratebuilder

Rank V

Pathfinder I

1,685
Pacific Northwest
First Name
Steve
Last Name
Claggett
Service Branch
U. S. Army
It took a few trips with my Decked drawers to get the configuration I wanted. I found the "tool box" and "dividers" didn't give me the desired effect, they are limited in placement. I finally have things organized with the tings I need most often at the front. Tie downs are in the storage boxes at the convenors. The new top just over the wheel wells is a larger surface area for the 2 totes I still use and sleeping is roomier.
 
  • Like
Reactions: Sparksalot
NiteSky

NiteSky

Rank IV

Enthusiast III

1,258
Shoreline, Washington 98155, United States
First Name
Tim
Last Name
McCabe
Member #

27709

reaver said:
In all seriousness though, I recently build a new drawer system for the back of my x. I still have to paint it (I don't have a garage, and it's too cold right now for paint).

I still need to get my gear in it, but here's the finished product.





All the electrical for my auxiliary electronics is hidden unter the top and up against the back of the seats. There's also an inverter and a water pump under there. There's a faucet on the passenger side, tucked up against the rear passenger side speaker. I have a 10 gal water tank that ended up being a bit too big, so right now, I'm trying to figure out what my options would be.
Click to expand...
I love that bottom pull out in the left drawer! I'm going to add that to my build. Such a great idea to create some counter space.
 
reaver

reaver

Rank VI
Member

Explorer I

3,680
Caldwell, ID, USA
First Name
Brian
Last Name
McGahuey
Member #

23711

Ham/GMRS Callsign
GMRS WRMV941
Thanks! When I was using the truck, I just used the tailgate. It made a great prep table and cooking surface. I lost that when moving to the Xterra. I still need to coat the table in polyurethane, and obviously paint the plywood, but I'm quite happy with how it's turned out so far. I might even add a lift top to the drawer to give me even more table space. I've not decided yet.
 
  • Like
Reactions: NiteSky
rb9228

rb9228

Rank IV

Enthusiast II

1,116
Yuma, Arizona, United States
First Name
Randy
Last Name
Banning
Member #

27704




PIcked up this used Decked system from one of my wheeling buddies. I replaced the locks and stuffed the drawers with a bunch of recovery gear, and other odds & ends I didn't want in the cab..
 
You must log in or register to reply here.
Top Bottom