Roof Rack RetroFit ?

  • HTML tutorial

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

Has anyone here retrofit or made a custom roof rack system for their Rigs?

I recently picked up an adjustable track system from an '05-ish Ford Expedition.  I'm going to trim it to the appropriate length and mount it to the roof of my Supercrew F150.

I have seen this done in the past on other peoples rigs and almost all of them leaked eventually, when they only drilled holes and used standard fasteners.

I'm going to use Rivnuts as blind fasteners with a little rtv and secure it down.

I ordered the Rivnut tool tonight and it should be here by tuesday or wednesday.  I'l take pictures as I go.
 

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

The tool arrived and I'll be doing the install this weekend.



 

Michael

Rank IX
Staff member
Founder 500
Member

Benefactor

15,584
Auburn, California, United States
First Name
Michael
Last Name
Murguia
Member #

0000

Ham/GMRS Callsign
KM6YSL
I'm curious how this goes @wolvee ! I don't have any experience with this. I had a purpose built rack!

M
 

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

A few of the guys on Portal are saying that it'll never hold but since Yakima (sp), Thule, Ford and Toyota use rivet nuts I have to assume they'll hold well. ..especially because I'll be using so many of them. I'm doing all my measuring, cutting and painting tonight and I'll do the actual install tomorrow. #Long Weekend. :0)
 

Erik_Harmon

Rank I
Founder 500
Launch Member

Contributor I

233
Don't get cheap with the RTV... I would even go as far as putting it around the edge of all the feet... my buddy had his leak and it was a real mess and ruined the head liner and head liner panel...
 

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

Just figuring out the length.



Trimming the rails.

I'm using Krylon Semi-gloss black to recondition the black color. I'm not cure if I'll use a UV protectant clear right now. I may disassemble it at a latter date and do it then.

I took off the rear plastic trim piece, then counted 5 mounting holes to the rear and made the cut.

Used a file to clean up the edges and then sprayed to cover the bare metal.

05+ roof rack




This is just showing how it slides in, not the finished product.
 

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

Because it was a 100* out today it had to be followed by a tropical storm, lol. I had to stop a bit early.

 

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

Now I"m on the hunt for a low profile removable rack to mount a light to. :0) I'm not going to put much up there, this is mostly for the Kayaks and some additional lighting when I'm on the trail.

I imagine I'll have a retractable awning, light bar, my pioneer gear and maybe misc box.

 
  • Like
Reactions: deeker and SLO Rob

Wolvee

ᕕ( ͡° ͜ʖ ͡° ) ︻デ═一 pew pew
Staff member
Moderator
Founder 500
Launch Member

Advocate II

2,271
Member #

0150

8 hours of Typhoon and no leaks. I a winner. :blush:
 

Iubootgater

Rank III
Founder 500
Launch Member

Advocate II

761
Greenwood IN
Member #

062

18121 said:
Now I”m on the hunt for a low profile removable rack to mount a light to. :0) I’m not going to put much up there, this is mostly for the Kayaks and some additional lighting when I’m on the trail. I imagine I’ll have a retractable awning, light bar, my pioneer gear and maybe misc box.
I have used the rhino rack "X-tray" on both a mini countryman and XJ Cherokee mostly for the purpose of hauling kayaks. Fairly cheap and no complaints. Comes in small and large.

Truck is looking nice.