Recovery Tracks Mounts - Cheap and Easy DIY

[ALNSM_Overland]

Recovery Tracks Mounts - Cheap and Easy DIY

Hi everyone !

I've put together a video showing how I've build my revovery tracks mounts.
They are sturdy, cheap, secured and easy to make (Without welding)
I hope that it's gonna help or inspired someone here

​

 

[Jedi]

Nice and simple. Well done.

 

[jeepers29]

Recovery Tracks Mounts - Cheap and Easy DIY

Hi everyone !

I've put together a video showing how I've build my revovery tracks mounts.
They are sturdy, cheap, secured and easy to make (Without welding)
I hope that it's gonna help or inspired someone here

​

Thanks for sharing. I have been thinking about options for this.

 

[SubeeBen]

Very nice diy mounts. Good looking work & great video. Thanks for sharing.

 

[JungleSkunk]

Great video. Super simple, easy to follow, and its something I might even try. Subscribed!

 

[stevet47]

Nice!
I had to watch the video with sound off, so perhaps you mentioned this in the video, but you should see about epoxying those spacers to the knob so you have less parts to loose/keep track of.

 

[Jedi]

I just mounted my tracks with a cheap and easy DIY:

 

[St8ton]

Nice! Just did something very similar for my RhinoRack Platform. I wanted quick, simple and cheap.

 

[ALNSM_Overland]

Nice!
I had to watch the video with sound off, so perhaps you mentioned this in the video, but you should see about epoxying those spacers to the knob so you have less parts to loose/keep track of.

I did not mention it in the video, but I was thinking about that ! I don't really know how to make this clean

 

[MunsterGeo Overland]

Nice one Jordan.

Enjoyed the video.

Well done on one year of YouTube too.

Keep the excellent videos coming

 

[Gabriel Bozeman]

Recovery Tracks Mounts - Cheap and Easy DIY

Hi everyone !

I've put together a video showing how I've build my revovery tracks mounts.
They are sturdy, cheap, secured and easy to make (Without welding)
I hope that it's gonna help or inspired someone here

​

Love it! Great job!

 

[vdubplate]

Nice job. How hard was it to drill a hole in the top of the bolt for the lock? Always gave me a lot of trouble

 

[ALNSM_Overland]

Nice job. How hard was it to drill a hole in the top of the bolt for the lock? Always gave me a lot of trouble

It was actually pretty smooth !
I was worried about this so I tried on an old bolt first.
And I perfectly did it on both actual bolts ! way easier than expected ;)

 

[JersT4R]

Thanks for sharing the video, it’s very easy to follow