on board air systems with air bags ( air lift ) springs

[Voyager1500]

Hi. So I recently installed air lift air bags out back for better support with loads. I had done a 3.5" leveling lift and once loaded up the rear was sagging too much. So bags solved that problem, however heres my question. I set it up with the valves at the rear bumper for each side independantly, I do have an onboard air system. How do I set it up so that I can use my air system normally, but also divert air when needed to the springs left and right independantly with some sort of switch and solinoid set up ? is that even possible, is there a kit for this purpose ?

Thank you

 

[Catch22Ranger]

You could plumb in leveling valve. It’s a mechanical air valve that you attach the leveling arm to a rod to the differential.

 

[Greayghost]

They make a kit , it comes with gagues and everything.
Or you can spend way more money and time and build your own kit.

 

[ptgarcia]

I'm going to follow your progress on this so please keep us updated on what you do.

I'd like to do something similar. I currently have onboard air to operate my exhaust brake, but I'd like to expand the system to fill my air bags, as well as have a quick connect to fill tires and stuff.