Midland MXT575 vs MXT275, unboxing and equipment visual comparison

  • HTML tutorial

Prerunner1982

Local Expert, Oklahoma USA
Launch Member
Member

Member III

3,372
Navina, Oklahoma
First Name
Jon
Last Name
B
Member #

16274

Ok, let me preface this by saying I am not a youtuber or content creator however I put together a short video unboxing both the 575 and 275 and comparing what you get in the box.
Midland MXT575 vs MXT275 unboxing and visual comparison - YouTube
I will have another video in the next day or two going through the settings.
 

Ubiety

Rank VI
Member

Explorer I

5,221
Sammamish, WA, USA
First Name
Greg
Last Name
Ubiety
Member #

6193

Ham/GMRS Callsign
Ribs
Awesome, thanks for taking the time! Would be very interested in how you perceive its performance, quality, etc.
 
  • Like
Reactions: Desert Runner

Prerunner1982

Local Expert, Oklahoma USA
Launch Member
Member

Member III

3,372
Navina, Oklahoma
First Name
Jon
Last Name
B
Member #

16274

Awesome, thanks for taking the time! Would be very interested in how you perceive its performance, quality, etc.
Had a buddy 10 miles away help me test.
He couldn't really hear me on the MXT275 but had me 100% 9n the MXT575.
Now I was using a 1/2 wave antenna for the 275 and though it's not a ground dependent antenna the lack of ground probably didn't help and my buddy was listening via a ham radio that is wideband where the 275 only transmits narrowband.
For the 575 I used the magmount and 1/4 wave antenna that comes with it. That magmount is super solid.
 
  • Like
Reactions: Ubiety

OTH Overland

Local Expert Washington, USA
Member
Investor

Trail Blazer III

4,847
Camano Island, WA, USA
First Name
Dave
Last Name
Ballard
Member #

20527

Ham/GMRS Callsign
N7XQP
Service Branch
Fire/EMS/SAR
I have two of the 275's and just installed a MXT500 into my JKU, for the rigs where I do not use GMRS often, the 275 has worked great, love that you can stash it away somewhere and have the all in on microphone, only real complaint I have with it is when starting the rig with the radio on, the 275 seems to power off (Likely due to the soft momentary on/off that looses its latching during vehicle start). Not a deal breaker, but annoying when you forget to check its on after a stop and miss radio traffic. Both rigs I have it mounted in use NMO roof mounted 1/2 wave antennas and have very good SWR readings, and great range.

The MXT500 (conventional version with controls on radio) is yet to be tested in the field, but seems to work well, It was hard to get a decent SWR on the JK though, Due mainly to antenna location (mounted on the cowl with a Rugged Radio bracket) I tried four different antennas before finding one that I could tune to an acceptable SWR (two were around 2:1 and the little factory supplied one was at 3:1) I ended up with 1:4 SWR using a Laird BB4502NS no ground plane antenna which I can live with.
 
  • Like
Reactions: Ubiety

WareWolf MoonWall

Rank V
Launch Member

Enthusiast III

2,420
Green Country, OK
First Name
WareWolf
Last Name
MoonWall
Member #

11831

Ham/GMRS Callsign
Direct Message Me..
Had a chance to watch the video, and you did a great job with the unboxing and the comparison of the two radios. Almost sounded like you might actually use them sometimes, unlike a bunch of folks on YouTube that seem more like they open the box and then return it hah.

Looking forward to the review with your usage etc.

Lastly, kinda jealous that you have one - online still says it won't be for sale until next week!

Just realized you are in Oklahoma too.. Wonder if I saw you at the meat run a few weeks ago lol
 

incogneato

Rank III
Member
Investor

Traveler III

528
Nashville, TN
First Name
Allen
Last Name
Lovett
Member #

3314

Ham/GMRS Callsign
K4VA

Kent R

Executive Director
Staff member
Mod Team
Moderator
Member

Pathfinder III

5,200
El Dorado, Ca
First Name
Kent
Last Name
Reynolds
Member #

1632

Ham/GMRS Callsign
K6KNT
Service Branch
Retired Firefighter
  • Like
Reactions: Prerunner1982