Trail Blazer II
Home brew roof rack
- Thread starter Klinton Kehoe
- Start date
Trail Blazer II
That steel grid will be very sturdy and great for walking on, but how do you plan on keeping it from rusting? Are you going to try to powder coat it?
I think the place that made my rack also uses something like that as an option, but they even say it is near impossible to keep it from rusting over time being out in the weather. I went with plastic interlocking chicken coop flooring.
I think the place that made my rack also uses something like that as an option, but they even say it is near impossible to keep it from rusting over time being out in the weather. I went with plastic interlocking chicken coop flooring.
Trail Blazer II
2 coats Selfie etching primer
Then 2mm of bedliner to seal it off. Gonna throw up the photos when I start that next week.
OB# 3753
Then 2mm of bedliner to seal it off. Gonna throw up the photos when I start that next week.
OB# 3753
Trail Blazer II
Trail Blazer II
Trail Blazer II
Trail Blazer II
Kargo Master 50541 4" Rain Gutter
if I had to order again I would try to find a 5 inch. Thry work but it's close.
OB# 3753
Traveler III
- 1,016
- First Name
- Arty
- Last Name
- Harber
- Member #
-
4047
AAAH! Light bar attached while welding! I don't know how well insulated it is. Does it still function alright? Nice rack build by the way, I really like your design!
Trail Blazer II
65 lbs with no lights I still have a 50 inch curved four 8inch pods and two 3 inch pods to mount on it.
OB# 3753
Trail Blazer II
Rack is mounted now just running the lights and wires
OB# 3753
Trail Blazer II
Trail Blazer II
Trail Blazer II
Trail Blazer II
