Harv's CDN M101 Overland Build

[harv3589]

Thought I would post our overland trailer build up on here. It's a CDN M101 that we picked up the spring of 2015 and have been working on since. It's getting close to be done, just some fine tuning now.

This is some pics of the trailer as it sat when we bought it.

View attachment 4138

View attachment 4139

Here is the day we picked it up and hauling it home. Was happy to get my hands on one.

View attachment 4140

 

[toxicity_27]

Nice. I'd love to build one of these, but I have no place to work on it, and can't find any in decent condition anywhere near me.

 

[harv3589]

It's been a long process. Some more build pics...most of it I worked on outside since I don't have a garage.

It was a complete tear down.

View attachment 4142

Had a lot of help from a friend with the tongue build at his place.

View attachment 4143

View attachment 4146

View attachment 4147

Replaced the bushing for the leaf springs and found some new military surplus leafs for it since the ones on it were shot.

View attachment 4144

View attachment 4145

 

[harv3589]

Had a few rusted areas that I had to cut out and weld in new metal. Wasn't bad but just time consuming.

View attachment 4148

View attachment 4149

Replace the factory drums with new ones so they had the same 5 on 5 bolt pattern as my jeep.

View attachment 4150

Cleaned up all the parts one by one and repainted them the original military green paint.

View attachment 4151

View attachment 4152

View attachment 4153

 

[harv3589]

View attachment 4154

 

[harv3589]

I had a local shop build a lid for me since it was beyond the scope of my abilities. They also fabbed up some new fenders so that the tires would be completely covered.

I attached some rails on the bottom side of the tent cross members so I could slide my table top up in there.

View attachment 4156

View attachment 4157

New Procomp wheels and 33" Duratrac tires to go on the trailer.

View attachment 4158

Welded up some baskets to hold my Scepter has and water cans on the tongue as well as a 10lb propane tank.

View attachment 4159

View attachment 4160

 

[harv3589]

Started getting it together now. Repainted the camo pattern on for a temporary fix until I have everything just right and I will have it Line X'd military green.

View attachment 4161

View attachment 4162

One of my favourite additions...

View attachment 4163

 

[harv3589]

Fixed up the triangle reflectors since they were bent up and in need of new paint.

View attachment 4164

Cleaned up and straightened the original plate for it. The front of the box was bent some so it had to be straightened up as well.

View attachment 4165

Coming together, tongue box on, table figured out to mount on gender and wiring done.

View attachment 4166

 

[harv3589]

View attachment 4168

View attachment 4170

Getting closer with pretty much everything mounted. The temporary painting is done.

View attachment 4171

 

[harv3589]

Nice. I'd love to build one of these, but I have no place to work on it, and can't find any in decent condition anywhere near me.

They r hard to find and its getting harder all the time. I jumped on this one when the guy offered it to me.

 

[Daniel Etter]

Nice build! I like that you are keeping the military color scheme!


Sent from my iPhone using Overland Bound Talk

 

[harv3589]

I built a tray to overtop of the spare tire to better utilize the room and it worked out good! In able to put a lot of stuff there and it doesn't go anywhere.

View attachment 4192

First test run with it last summer! Worked out great just a few minor things to change and add on.

View attachment 4193

 

[harv3589]

This year I added the awning and mounts to it.

View attachment 4194

View attachment 4195

View attachment 4196

 

[harv3589]

Nice build! I like that you are keeping the military color scheme!


Sent from my iPhone using Overland Bound Talk

Thanks! I like the camo too but will have to loose it when it gets line X'd so it will be the solid military green then unless I decide and am brave enough to paint the line X.

 

[toxicity_27]

That looks really good and makes me wish I had one more now.

 

[tzorb]

Looks great! I love seeing an actual build thread not just finished pictures.
What model m101 is it? Most of the m101's around here a huge.


Sent from my iPhone using Overland Bound Talk

 

[harv3589]

Looks great! I love seeing an actual build thread not just finished pictures.
What model m101 is it? Most of the m101's around here a huge.


Sent from my iPhone using Overland Bound Talk

Thanks!

It's a M101 CDN 2 so the smaller version built for the Canadian Military. Really sought after for these builds since they are so tough. Made to parachute out of a Hercules plane actually....

 

[WJ - Firefly]

FYI...

The M101 CDN is the Canadian military version of the US M416 1/4 ton trailer pulled behind GPs (Jeeps). The US M101 is a 3/4 ton trailer pulled behind 3/4 ton or larger military trucks. The M101A3 is its 1 ton bigger brother used behind HMMWVs (Hum-Vees).

I am looking for a 416/101 CDN for extra gear.

 

[doobie_dave]

Maybe you can enlighten me..

I realize that these things are tough and really cool, being old military and all.

But people go through so much trouble to find them, and spend so much to get them.

Why not just buy an axle and put a box on it? Whats so special about these?

Im just curious thats all. Thanks!

Sent from my LGLS991 using Overland Bound Talk mobile app

 

[WJ - Firefly]

Used to be you could pick them up, ready to roll for $500-$1000. Now they are becoming harder to find and the price is going up. I still hope to find one at a local auction or tangled up in the weeds behind some farmer's barn... I am looking at other options...