Enthusiast III
Everyone post their lighting setups!
- Thread starter Autism Family Travels
- Start date
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Just a few lights. The main ones are the ditch/pod lights on the hood, HID low beam projectors, LED high beams, 20" LED single row bar attached to bull bar (the LED strip you see on the top windshield is a reflection of 20" bar), then HID fogs. I also have deer whistles to give the animals an early signal.
Member III
We don't drive at night where there's a significant risk of hitting animals. If unavoidable, then we drive "within the lights".
No extra lights, although we replaced the bulbs in the standard "explorers" with LEDs.
No extra lights, although we replaced the bulbs in the standard "explorers" with LEDs.
Enthusiast III
- 646
- First Name
- John
- Last Name
- Duggan
- Member #
25594
Ive only got a set of ditch lights, Im saving for the light bar next that will go up front plus i need some chase lights
Enthusiast III
I am getting ready to get my lighting figured out. We NEED auxiliary lighting here as we have so many moose on the island. I have just become a dealer for a crap load of different brands for everything automotive so I am waiting to see what kind of pricing I can get on some of the different brands.
The new ARB Solaris lights look like a great value. I really like the differing output levels you can use.
Of course, before learning about them today I had just ordered something else... kinda kicking myself now.
Of course, before learning about them today I had just ordered something else... kinda kicking myself now.
Member III
Not much but LED hibeams and lowbeams, led blinkers, swapped DRL's to blinkers to look like the 90's Chevy's, and some cheap Amazon fog lights with orange tint. (Pic is from when they had yellow tint, looked green when they were on and didn't like it)
Also @RoarinRow I have a fleece performance 6 hi chip in my fuse box that turns on hi's, low's, and fogs with the hibeam switch. In case you wanted a bit more light for cheap
Also @RoarinRow I have a fleece performance 6 hi chip in my fuse box that turns on hi's, low's, and fogs with the hibeam switch. In case you wanted a bit more light for cheap
Explorer I
Lightforce Venom, and 4x Rigid D4's up front.
1 Nilight on the passenger side to light the side.
2 Lightforce ROK40's rearward facing.
1 Nilight on the passenger side to light the side.
2 Lightforce ROK40's rearward facing.
Benefactor
- 15,584
- First Name
- Michael
- Last Name
- Murguia
- Member #
0000
- Ham/GMRS Callsign
- KM6YSL
Enthusiast III
Member III
- 2,771
- First Name
- Rolando
- Last Name
- Nispiros
- Member #
17011
- Ham/GMRS Callsign
- KN6JJS
Sweet clean rig B! I'm good on lights for now...I had that similar light mod in my last truck and rarely if at all used it.
Member III
- 2,827
- First Name
- Kevin
- Last Name
- Trvlr
- Member #
20466
- Ham/GMRS Callsign
- KK7NAZ
- Service Branch
- MM1 US Navy
I've been using these Grote lights for 25 years new and someday I may replace them with LEDs but for now they work just fine. The center 2 are 250,000 cp spot beams for reaching out in the dark and the 2 pointing out about 45* are 35,000 cp work lights for eyes and stuff on the side of the road.
In the rear I have these oval lights for working behind my rig and backing up.
In the rear I have these oval lights for working behind my rig and backing up.
Enthusiast III
Traveler III
- 2,105
- First Name
- John
- Last Name
- Boucher
- Member #
14789
- Service Branch
- Retired USN
Traveler II
Savin yours
Rank III
Enthusiast III
Enthusiast I
