Sounds like good advise. As for that radio, it sounds like more radio than I need (3rd Gen) . What about the 2nd Gen, Only $23 bucks and less capable. I don't think I want to go the ham route because that to me is a completely separate hobby and just adds to more cost to OB'ing.
The capability of either radio is the same. The power levels may be different and they will have some little nuance things but they will still operate on the same frequency ranges.
I understand not wanting to engage in another hobby.
For me, I got interested in Ham while doing CB installs for my off-roading buddies in college. I naturally want to do anything I try well. I'm not the dive in blindly type so I did a lot of research on doing the installs to get the most out of them. That led to a lot of references to Ham radio. When my Mom saw my antenna, she talked about the CB she had in her Regal in the 70's her Dad installed and then told me to go see my Great Uncle and see what he had to say. He laughed but gave me a SWR meter he and my Grandpa had bought together when they got into CB radio. He then told me to get my license and then I could do some real talking. It's still a little sad that I didn't get my license until after he was too sick for us to talk on the radio any. But that's another story.
Honestly, it's like any other hobby. You can be as interested and involved as you choose to be. I really enjoy checking into local nets and have made a good many friends in the hobby. There are folks who get their Tech license and don't do anything but talk on the radio to other locals on the repeaters. And that's fine! I found that I really enjoy contesting and that drove me to upgrade my license and start putting together my HF station. The club operates a few contests each year from our EOC and it's always a good time full of laughs, good food and a little radio play.
But GMRS is useful too, especially if you have a GMRS repeater close to you that you can get permission to use. In Ham, if you put up a repeater it's expected that it'll be open for any other licensed operator to use. In GMRS, they are more personal and you have to have direct permission from the owner to use it. But a GMRS machine with a little altitude can have a huge foot print. Again, it's not guaranteed you'll be able to use it from EVERYWHERE you might be. Terrain, altitude, even the leafs on the trees can affect those frequencies so you might be able to easily raise the repeater standing on your front porch in December, but not in July when the leafs are on.