Enthusiast II
Spent some time researching different drawer systems and decided to get handy during this quarantine and made my own prototype drawer system. Worked some kinks out and still have a few more to figure out, but she works well!
DIY 4Runner drawer build
- Thread starter CoastieMo
- Start date
Advocate III
- 5,584
- First Name
- Michael
- Last Name
- Rose
- Member #
-
20990
- Ham/GMRS Callsign
- W7FSB
- Service Branch
- US ARMY Retired
Contributor II
@KRose
Should be no problem to remove. Undo the 2 turnbuckles and if they have it bolted down at the body mount points behind the back seat unbolt the 2 bolts.
Then just slide the setup out. My similar setup is about 125lbs so take it easy when moving.
Boort
Enthusiast I
Enthusiast II
@KRose, I made it quitre simple to remove! there are 4 turnbuckles two on the back and two on the sides. the drawer housing weighs about ~30lbs i used 3/4 hardwood plywood throughout. the drawers maybe weigh 6-8lbs each empty.
Contributor II
Enthusiast II
@Teng 86 there are quite a few plans floating around for the 4th gen body. Just a simple google search and they're there. Just be sure that the schematics are for correct gen!
@Teng 86
Check out the plans from @TheAdventureIndex. I started with his plan and modified them to be more like the system in this thread to fit my needs. They came out great and are one of my favorite additions to my 4th Gen.
Free Camping/Overland Drawer Plans! - 4Runner
The Drawer Plans are finally out! After many efforts and delays, I am happy to announce to everyone that the drawer plans are finally out! This is a modular system designed for use in the 4th gen 4Runner that I built for myself. This means if someone wants to build just one part of the 4 part...
Boort
Enthusiast I
Contributor III
