Custom Offroad camper trailer. Built from an indestructible military M116A-1 Hydraulic hose fitting trailer. Trailer is currently registered and plated in California. Clear title and pink slip in hand. I built this trailer to be a sweet little sleeper camper that you could tow anywhere! Has 35" original military tires and rims. Super beefy axle. Has individual hang e-brakes for each side, both work perfectly. Leaf springs all have grease able shackles. Trailer base frame and axle are steel the whole box is aluminum so its much lighter than it looks, I can pick up the tongue and walk it around. Tag says 800lbs approx. I removed a lot of the interior and then added the camping components but have not weighed it at a scale yet. I tow it with my 90 toyota pickup. Trailer is ready to camp!!! All that I haven't finished is trim inside. Feel free to email or text with any questions. 925-seveneightfour-47six2
CHECK OUT THE BUILD THREADS BELOW FOR MORE PHOTOS AND INFO
instagram-
condent_4x4
overland bound build thread
http://www.overlandbound.com/forums/threads/offroad-trailer-build.1795/
expedition portal build thread-
http://www.expeditionportal.com/forum/threads/157094-Off-road-camper-trailer-build-campertrailerbuild
Build specs:
All aluminum body
Smoked acrylic windows
All doors seal water tight and have working locks
Brand new tear drop style RV door w/window that opens
Hook and pintle hitch (have hitch for a 2" receiver for the right price)
Original tongue leg, as well as brand new crank lift leg that folds up out of the way
Custom stainless battery guard plate
E-brake on each wheel
Custom step/rock sliders all the way around
2005 tacoma blue paint
2 LED flood pods on sides of trailer
100Watt Renology solar system with smart controller, battery temp monitor, and remote voltage monitor. Will run a small fridge no problem with 4 hrs of sunlight a day.
100AH AGM Duracell battery
Roof vent with fan
Maxair roof vent cover so vent can be open in the rain or while driving.
Interior dimmable led lighting
Cigarette lighter style 12v charging plug
USB charging ports for phones or electronics
Voltage meter display
Rocker switch panel to control all electronics
All electrical components are fused
Interior walls are insulated with 2" thick Tyvek foam board then finished with thin plywood
Floor is insulated and then ½"plywood and laminate flooring
all trailer needs is interior trim and maybe a few little things here and there to make it your own.
fenders have small crack from previous damage i have not fixed yet. but might have done before it sells.
I'am selling to fund another truck project. $6800 obo willing to trade for the right built crawler, dual cases, lockers, SAS Toyota, 4 runner, feel free to email me offers or photos of trades. Not in a hurry to sell, just want a new project.
CHECK OUT THE BUILD THREADS BELOW FOR MORE PHOTOS AND INFO
instagram-
condent_4x4
overland bound build thread
http://www.overlandbound.com/forums/threads/offroad-trailer-build.1795/
expedition portal build thread-
http://www.expeditionportal.com/forum/threads/157094-Off-road-camper-trailer-build-campertrailerbuild
Build specs:
All aluminum body
Smoked acrylic windows
All doors seal water tight and have working locks
Brand new tear drop style RV door w/window that opens
Hook and pintle hitch (have hitch for a 2" receiver for the right price)
Original tongue leg, as well as brand new crank lift leg that folds up out of the way
Custom stainless battery guard plate
E-brake on each wheel
Custom step/rock sliders all the way around
2005 tacoma blue paint
2 LED flood pods on sides of trailer
100Watt Renology solar system with smart controller, battery temp monitor, and remote voltage monitor. Will run a small fridge no problem with 4 hrs of sunlight a day.
100AH AGM Duracell battery
Roof vent with fan
Maxair roof vent cover so vent can be open in the rain or while driving.
Interior dimmable led lighting
Cigarette lighter style 12v charging plug
USB charging ports for phones or electronics
Voltage meter display
Rocker switch panel to control all electronics
All electrical components are fused
Interior walls are insulated with 2" thick Tyvek foam board then finished with thin plywood
Floor is insulated and then ½"plywood and laminate flooring
all trailer needs is interior trim and maybe a few little things here and there to make it your own.
fenders have small crack from previous damage i have not fixed yet. but might have done before it sells.
I'am selling to fund another truck project. $6800 obo willing to trade for the right built crawler, dual cases, lockers, SAS Toyota, 4 runner, feel free to email me offers or photos of trades. Not in a hurry to sell, just want a new project.
Last edited:
