Custom Bumpers

[SuckCreekOverland]

Would love to see some of the custom bumpers y'all have built! Hoping to make one soon!


Sent from my iPad using OB Talk

 

[Jake McBride]

How does one go about making a custom bumper?

Sent from my SM-G925P using OB Talk mobile app

 

[SuckCreekOverland]

I work with a local fabricator @Jake McBride



Sent from my iPad using OB Talk

 

[Exped4x4]

Heres some photos of the one i had fabbed up. I had space left open for some KC C series led squares for some rear facing lights. the open tubed ends double as steps and points to wrap recovery straps around. Then of course line xd the whole thing.
Where are you located if ya dont mind me asking

 

[Jake McBride]

I work with a local fabricator @Jake McBride



Sent from my iPad using OB Talk

Cool, thanks!

Sent from my SM-G925P using OB Talk mobile app

 

[SuckCreekOverland]

View attachment 14060 View attachment 14060 View attachment 14061 View attachment 14062 View attachment 14063 Heres some photos of the one i had fabbed up. I had space left open for some KC C series led squares for some rear facing lights. the open tubed ends double as steps and points to wrap recovery straps around. Then of course line xd the whole thing.
Where are you located if ya dont mind me asking

Looks good! Chattanooga, TN and I work with B.Lees Off-road


Sent from my iPad using OB Talk

 

[Raul B]

Front is a custom mercenary offroad

Rear is a custom dual swing out bumper...

Sent from my SM-G930T using Tapatalk

 

[Fellow Jeeper]

Truck looks good! Like the bumpers. What size winch were you able to squeeze in the front?

Sent from my SM-G935V using OB Talk mobile app

 

[SuckCreekOverland]

Absolutely loving that build!! Especially that front bumper! @Raul B


Sent from my iPad using OB Talk

 

[Overland-Indiana]

I have JCR front and rear bumpers, currently working on designing a rear swing-out tire carrier to go onto my JCR bumper.

 

[grumpy]

I have JCR front and rear bumpers, currently working on designing a rear swing-out tire carrier to go onto my JCR bumper.

Hi, I have a Ram 2500 and I want to put the spare tire on a swing to go onto my fab4 bumper. I will use that space under the bed for an extra gas tank. It will be great to see your design and what type of material you used.
Thank you


Sent from my iPhone using OB Talk

 

[Raul B]

Truck looks good! Like the bumpers. What size winch were you able to squeeze in the front?

Sent from my SM-G935V using OB Talk mobile app

Thank you.... we were able to fit a 9.5k winch in there.....

 

[ElDusto]

here's the rear on my commander i built


Sent from my iPhone using OB Talk

 

[ElDusto]

and here's the front ..i built mine with 4 x 2 rectangular tubing and 3 and 4 inch flat plate and a little bit of patience and a dash of rock and roll [emoji23]


Sent from my iPhone using OB Talk

 

[Hank Outdoors]

and here's the front ..i built mine with 4 x 2 rectangular tubing and 3 and 4 inch flat plate and a little bit of patience and a dash of rock and roll [emoji23]


Sent from my iPhone using OB Talk

How tall/what type of lift did you go with for your Commander?

 

[Smileyshaun]

Here's a couple I've made over the years , I try to keep them as simple as possible and tucked in close to the body , I really do miss some of those rigs

 

[bonsaidave]

Is the back bumper I built . And the front bumper that I'm in the process of building

Sent from my SM-G900P using Tapatalk

 

[64Trvlr]

I hope it's ok to reply to an old thread instead of making a new one.

I needed a couple of bumpers on my Willys for a 2 week trip to CO. I had a piece of 2X6 1/4" wall tube and use that to whip up a couple of bumpers, they each have 2 D rings that are reinforced and in line with the frame rails. The front bumper is also an air tank, has a winch mount and 2" receiver built in and holds 4 lights. The rear has a 7way RV plug, a 2" receiver and back-up lights.

I realize they're not as cool and they don't have the new generation lights that are out now but they have worked well for over 25 years and 100K miles.

 

[The Ocular Engineer]

Nice. Nothing says fu like 1/4" steel!
My brother has had a couple of the Jeep wagons and trucks over the years. I wish I had gotten one from him back in the '90s

Here is my addition to the bumper build thread:

 

[64Trvlr]

Nice work there OC but that is one shiny new Hi-Lift you have there.