Another DIY Awning

[Pyrotech]

Came across an interesting video for a DIY Awning. I have been wanting one, and being a the type who rather build than buy, well you can guess what happen.

Here is the video,


Some random pictures from the build process.

View attachment 164787

View attachment 164783

View attachment 164784
View attachment 164785

View attachment 164786

I still need to make the cover. and add some velcro straps to help tighten up the awning to the frame.

 

[Pyrotech]

got the cover made tonight, would have turned out MUCH better if I had not mis-ordered the vinyl. I ended up having to sew on an extra piece to make it long enough. I forgot I ordered the vinyl for another project oops...

Tomorrow is a my last day of my off week, so that usually means getting things ready for the next 8 days of work, But I might be able to get this buttoned up and on the truck permanently.

 

[Pyrotech]

Awning cover is done an installed. Now time to see how well it hold up.

View attachment 166633


View attachment 166634

 

[Pyrotech]

Couple pictures of it in the wild....

View attachment 169613

View attachment 169614

 

[Pyrotech]

The homemade awning is turning out to be fairly durable. All things considered .
View attachment 187442
View attachment 187446

Held up well to the gulf winds. 15 to 20mph winds.. But with out guying the awning there was no way I was going to trust it overnight. The poles where buried a couple inches in the sand and with the back side.free.to billowmout there was no lifting of the frame at all

If anyone decides to build.one look up kedar rail or awning rail should do alot to mprove the attachment points for the fabric.

I am not sure if I like the hose mod on the swing out arms or not..

There needs to be a couple more.holes on the arms to adjust the awning .

And it needs some.more velcro straps to secure the fabric to the swing outwards.

The m18 lantern worked great hanging from the awning when it got dark.

 

[RatAssassin]

I have a whopping $30 into mine and it works great.

 

[Pyrotech]

RIP diy awning..

A gust of gulf wind did it in. It had been reasonable far as winds went during daylight hours. But a sudden gist came along and flipped it up on top of the truck tearing one of the rubber "hinges". And bending the EMT poles a bit.


Should have put a Deadman in for it. Like we did the shower tent...View attachment 200421

 

[lhoffm4]

I dig it! Clean, looks professional, great work!

 

[Longshot270]

I used to use old fishing rods since they had a bit of give to them. I would also use a rod holder and either drop the pole in directly or tie off.
Also look into the screen instead of solid tarps I’d just for shade.

 

[Longshot270]

Also, if you don’t have coolers and water jugs to hold things down, I would carry a small stack of good 3 gallon buckets that I’d fill with sand and then top off with ocean water.