2020 Tundra Starting the Build.

[NoMoreGreen]

That plate is made by SDHQ its part of this kit,

'14-20 Toyota Tundra SDHQ Built Complete Switch Pros RCR-12 Mounting Kit

This complete Switch Pros RCR-12 Overhead Mount for the '14-20 Toyota Tundra allows you to mount a Switch-Pros RCR-Force-12 in your Tundra's overhead console.

sdhqoffroad.com

here is the plate by itself

'14-21 Toyota Tundra SDHQ Built Switch Pros RCR-12 Overhead Mount

SDHQ Built Switch Pros RCR-12 Overhead Mount for the 2014-2021 Toyota Tundra is designed to securely mount the keypad component of your Switch Pros RCR-Force 12

sdhqoffroad.com

Are you also in a tundra?

Yes.. I mentioned it above.. 2016 DC.

Sorry I missed that!

Almost the same truck.

 

[NoMoreGreen]

If the underhood mount HAS to be mounted in front of the battery, that won't work in my application as I have a Genesis OffRoad dual battery set up in the stock battery location and there is NO extra room there..

The SDHQ portion of the kit was the mount for what is pictured above, and the switch panel. The rest is all Switch Pros.

Does not have to be mounted there, just the mount I chose. There maybe other panels available and/or mounting elsewhere wont be hard. The only trick I can forsee is having the power cable long enough, but that can easily be rebuilt.

Here is an unboxing of the kit. The kit from Switch Pros does come with another universal mount.

 

[NoMoreGreen]

Got this thing in!

 

[NoMoreGreen]

Got this in as well. Tundra goes in next week for Eaton lockers and 5.29s

 

[NoMoreGreen]

Tried to be cheap and use Milton fittings I had on hand for this project. Turns out it makes the system too long and hits the air box. An arb fitting and a cobbled together 90 degree elbow later.

Gears are quiet and being broken in. Been to chicken to test lockers

 

[BAJA - PRO]

Nice

 

[NoMoreGreen]

Baja squadron sport spots added. Next up is addressing trans temps.

Starting to save up for the rear bumper / tire carrier now. Then focus on the inside of the bed for awhile.

 

[NoMoreGreen]

little bit closer!

Dual battery wiring is next.

 

[NoMoreGreen]

alright figured out mounting for the bcdc 1225d, let’s get this bad boy wired!