Member II
Sorry some of my pics went away, but I haven’t been able to fix them . Let me know if anyone has questions, I am happy to help!
2013 Land Rover LR4/Discovery 4 Build Thread
- Thread starter finlayforprez
- Start date
-
- Tags
- discovery4 land rover lr4
Hello everyone from Russia!
I’m sorry, my friends... Does anyone know what happened with David @finlayforprez ? He is OK?
I’m sorry, my friends... Does anyone know what happened with David @finlayforprez ? He is OK?
Member II
Hello my friend! I am just fine, but got rid of social media completely - including Instagram. I saw an email come through with your reply, but I have not even been on OB in almost 2 years! I hope you are well and having a good winter.
Send me a message on here and I’ll share my contact information.
He's all good but in a Land Cruiser now as he parted ways with his beloved LR4. You can check him out on Instagram under the same name.
Member II
Hey @gulfstreamchris . I don’t have Instagram anymore, deleted it last year. I think that’s why Eugene was looking for me as we usually connected on that. How are you? I’m up in Shreveport.
Contributor III
Not sure if you still check OB, but I'm curious about the hole in the stock light switch plate cover. Are there components in there that I need to be mindful of damaging when drilling through it? I'm looking to put at least one switch, but more in the space above the fog light switches next to the dashboard light dimmer.
Are there any diagrams online regarding the internals for this component?
Thanks!
Andrew
Are there any diagrams online regarding the internals for this component?
Thanks!
Andrew
Front Bumper, Winch, and Off-road Lights
Just take your time with everything, including the winch install, and don't rush or cut corners with anything. ARB supplies scotch clips to tie into the headlamp harness, but I chose to use heat shrink connectors and really took my time with the electrical connections, that was the hardest part for sure. I also wanted to wrap everything really well and as clean as possible. For the off-road lights, I used the stock light switch plate cover, ran the wires through the firewall, and then drilled a hole for a really clean install and look.
Member II
Hello! I haven’t checked OB in a while, but I saw this email come through. No, you just pop it off and there is a clip on a wire. You can easily see the surfaces that can be drilled. It’s a lot easier than it looks once you pull the plate off. I am not sure if there are diagrams online… I used to have a CD of everything but gave it away when I sold my rover 2 years ago. Good luck!Not sure if you still check OB, but I'm curious about the hole in the stock light switch plate cover. Are there components in there that I need to be mindful of damaging when drilling through it? I'm looking to put at least one switch, but more in the space above the fog light switches next to the dashboard light dimmer.
Are there any diagrams online regarding the internals for this component?
Thanks!
Andrew
Front Bumper, Winch, and Off-road Lights
Just take your time with everything, including the winch install, and don't rush or cut corners with anything. ARB supplies scotch clips to tie into the headlamp harness, but I chose to use heat shrink connectors and really took my time with the electrical connections, that was the hardest part for sure. I also wanted to wrap everything really well and as clean as possible. For the off-road lights, I used the stock light switch plate cover, ran the wires through the firewall, and then drilled a hole for a really clean install and look.
Contributor III
Thanks for taking the time to reply. Guess it'll be obvious once I get into it.
Thanks again!
Thanks again!
